Disc source ? "AUX1" is displayed without achieving External disc control mode. . Unsupported disc changer is connected. . Use the disc changer mentioned in the IMPORTANT INFORMATION of the section on (page 3). ? The specified disc does not play, but another one plays instead. . The specified CD is quite dirty. . Clean the CD. . The disc is loaded in a different slot from that specified. . Eject the disc magazine and check the number for the specified disc. . The disc is severely scratched. . Try another disc instead. ? A CD ejects as soon as it is loaded. . The CD is quite dirty. . Clean the CD, referring to the CD cleaning of the section on (page 5). ? Can’t remove disc. . The cause is that more ACC switch was turned . The disc can only be removed switch being turned OFF. If more than 10 minutes has turn the ACC switch ON again ? The disc won’t insert. . There’s already another disc inserted. . Press the [ 0] button and remove the disc. ? Track Search can't be done. . For the discs/folders first or last song. . For each disc/folder, Track Search can't be done in the backward direction for the first song or in the forward direction song. MP3 source ? Cannot play an MP3. . The media is scratched or dirty. . Clean the media, referring to the CD cleaning of the section on (page 5). ? The sound skips when an MP3 is being played. . The media is scratched or dirty. . Clean the media, referring to the CD cleaning of the section on (page 5). . The recording condition is bad. . Record the media again or use another media. ? The MP3 track time isn’t displayed correctly. . -- . There are times when it isn’t displayed correctly according to the MP3 recording conditions. If the following situations, consult your nearest service center: Even though the disc changer is connected, the Disc Changer source is not ON, with "AUX1" showing in the display during the Changer Mode. — 36 — The messages condition. The messages condition. : No disc magazine has been The disc magazine is not completely . Load the disc magazine properly. No CD in the unit. . Insert the CD. No Disc/ NO DISC: No disc has been loaded in the disc magazine. . Load a disc into the disc magazine. TOC Error/ TOC ER: No disc has been loaded in the disc magazine. . Load a disc into the disc magazine. The CDI is quite dirty. The CD is upside-down. The CD is scratched a lot. . Clean the CD and load it correctly. E-05: The CD is upside-down. . Load the CD correctly. Blank Disc/ BLANK: Nothing has been recorded on the MD. No Track/ NO TRACK: No tracks are recorded on the MD, although it has a title. E-15: Media was played that doesn’t have data recorded that the unit can play. . Use media that has data recorded that the unit can play. No Panel/ NO PANEL: The faceplate of the slave unit being connected to this unit has been removed. . Replace it. E-77: The unit is malfunctioning for some reason. . Press the reset button on the unit. If the "E-77" code does not disappear, consult your nearest service center. Mecha Error/ MECHA Something is wrong is malfunctioning for some . Check the disc magazine. button on the unit. If the "Mecha code does not disappear, consult your nearest service center. Hold Error/ HOLD ER: The protective circuit in the unit activates temperature inside the automatic disc changer (140°F), stopping all operation. . Cool down the unit by opening the windows or the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. NO NAME: Attempted to display DNPS during the CD play having no names preset. Load/ LOAD: Discs are being exchanged in the Disc changer. Reading: The unit is reading the data on the disc. NO ACCESS: After setting it in the Disc Changer, DNPP was done without having it been played at least 1 time. IN (Blink) : The CD player section is not operating properly. . Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center. — 37 — English English Specifications FM tuner section Frequency range (50 kHz ..............87.5 MHz – 108.0 (KDC-5094R FM1; 30 kHz .............65 MHz – 74.0 MHz Usable sensitivity (S/N = 26dB) ................................ 0.7 .V /75 . KDC-5094R FM1 .......................... 1.4 .V /75 . Quieting Sensitivity (S/N = 46dB) ............................. 1.6 .V /75 . Frequency response ( ± 3 dB) .................................30 Hz – 15 kHz Signal to Noise ratio (MONO) ..............................................65 dB Selectivity (DIN) ( ± 400 kHz) .............................................. . 80 dB Stereo separation (1 kHz) ....................................................35 dB KDC-5094R FM1 ......................................... — MW tuner section Frequency range (9 kHz space) .....................531 kHz – 1611 kHz Usable sensitivity (S/N = 20dB) ...........................