Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
The display of the track number changes next track is being selected. When the track has been selected, play The selected track number blinks in played. NOTE The random play function is cancelled when you stop playing a disc. Magazine Random Play Function of remote Play the tracks on all the discs in the disc changer in random order. 1 Press the M.RDM button to switch magazine random play on and off. The M.RDM indicator lights up when magazine random play is turned on. The disc and track numbers will change over and over in the display as the next track is being selected. When the disc/track has been selected, play will begin. The selected disc/ track number blinks in the display as it is being played. 2 To change the track being heard, press the T. UP button. Another disc/track will be selected and played. NOTE • Magazine random play is canceled when you stop • The time needed for random selection depends of discs loaded in the disc magazine. When all the tracks on a certain random play function, the (with the random play 2 To change the track . ( T. UP...Remote) button. Another track — 11 — — 12 — English To set the frequency change mode Press the REP button for at least three seconds. The FREQ indicator will light up and the currently set frequency will be displayed. • The initial value is 88.3MHz. • If this function is on, the functions other than power on / off, reset, and modulation level / dynamic control, cannot be operated. • This function is not available when the random play, repeat play, or scan play function is on. Before using this function, cancel the other functions. This function cannot be used while loading a disc (while the play indicator is blinking). To change the frequency Press either the 4or .button. Each time you press the 4or .button, the mode switches as follows : 2 NOTE 1 Changing the Transmission Frequency Some car radios cannot receive a 87.7 MHz frequency. To cancel : Press the REP button on the display unit for at least three seconds. The FREQ indicator will go off and the frequency change will take effect. The frequency change mode is automatically canceled if you do nothing for 15 seconds. NOTE 87.7MHz 87.9MHz 88.1MHz 88.3MHz (initial value) 88.5MHz 88.7MHz 89.9MHz 89.7MHz 89.5MHz 89.3MHz 89.1MHz 88.9MHz .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... . . FREQ MHz Operations Modulation level / Dynamic control Modulation level / Dynamic control Press the RDM button on the display unit for at least three seconds. The LEVEL indicator will light up and the currently set modulation level will be displayed. Modulation level NOTE Dynamic control The unit comes with the prevention of distortion function to reduce sound distortion. If the sound is distorted severely, press the + button on the display unit and then set the function to "2" (ON). If the prevention of distortion function is set to "2" (ON), the sound extension is reduced. The initial setting is "1" (OFF). LEVEL Number for prevention of distortion setting NOTE • If this function is on, the functions other than power on / off, reset, and changing the transmission frequency, cannot be operated. • This function is not available when the random play, repeat or scan play function is on. Before using this function, cancel the other functions. This function cannot be used while loading a disc (while the play indicator is blinking). 2 To change the modulation level Press either the 4 or . button. Each time the 4 or . button is pressed, the modulation level changes in the range from 1 to 4. As increases, the modulation level increases. 2CAUTION If a disc with a high recording level is used, the sound may distort even if the prevention of distortion function is set to "2" (ON). In this case, reduce the modulation level. To cancel : Press the RDM button on the display unit for at least three seconds. The LEVEL indicator will go off and the modulation level change will take effect. The control mode is automatically canceled if you do nothing for 15 seconds. — 13 — — 14 — English Accessories .........1 1 .........4 2 .........4 3 .........1 4 External view ......... Number of items The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. 2CAUTION When drilling a hole in the car chassis to install the unit, check first that nothing is on the other side. • If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating. • Do not let unconnected wires or terminals touch metal on the car or anything else conducting electricity. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. • After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. • Insulate unconnected wires with v...
Este manual também é adequado para os modelos :Unidade - KDC-C517FM (476.99 kb)