When a CD is inserted, the “IN” indicator is ON. . • 3 inch CD cannot be used. Attempt to insert using an adapter can cause malfunction. • Refer to (page 14) for the Audio file by models you can play. Pause and play Control knob Switches between pause and play each time the center is pressed. Disc ejection [0] . • You can eject the disc for 10 minutes after switching off the engine. Music search Control knob Changes the music when the left or right side is pressed. Fast reverses or forwards the music while pressing the left or right side. Folder/Disc search (KDC-MP439/KDC-MP3039/ KDC-MP339/KDC-MP239) Control knob Switches the folder containing the audio file or the disc in the disc changer when pressing the top or bottom side. Track/ File/ Disc/ Folder repeat play [4] Switches between Track Repeat (“TRAC REP”/ “REP”), Disc Repeat (“DISC REP”) (In Disc Changer), and OFF (“REP OFF”) when pressed while playing a CD. Switches between File Repeat (“FILE REP”), Folder Repeat (“FOLD REP”), and OFF (“REP OFF”) when pressed while playing an audio file. Scan play [2] Successively plays the intro of the music in the disc or folder. “TRAC SCN”/ “FILE SCN”/ “SCN” is displayed during Scan Play. Random play [3] Randomly plays the music in the disc or folder. “DISC RDM”/ “FOLD RDM”/ “RDM” is displayed during Random Play. Magazine random play (KDC-MP439) [6] Randomly plays the music in the disc changer. “MGZN RDM” is displayed during Magazine Random Play. Text/Title scroll (KDC-MP439/KDC-MP3039/KDC MP339/KDC-MP239) Control knob Scrolls the CD and audio file text display when pressing the top side for at least 2 seconds. English | 5 General Operation Audio Control 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Audio item to adjust Press the [VOL] knob. Adjustment Item Display Range Subwoofer level “SW L”/ “L SUB” –15 — +15 System Q “NATURAL/FLAT”/ Natural/Rock/Pops/Easy/ “ROCK”/ “POPS”/ Top 40/Jazz/User setting “EASY”/ “TOP40/TP40”/ “JAZZ”/ “USER” Bass level “BAS L”/ “L BAS” –8 — +8 Middle level “MID L”/ “L MID” –8 — +8 Treble level “TRE L”/ “L TRE” –8 — +8 Balance “BAL”/ “BL” Left 15 — Right 15 Fader “FAD”/ “FD” Rear 15 — Front 15 Exit Audio Control mode (Volume control mode) . • “USER”: This appears when Bass level, Middle level, and Treble level are adjusted. When “USER” is selected, these levels are recalled. 4 Adjust the Audio item Turn the [VOL] knob. 5 Exit Audio Control mode Press any button. Press a button other than the [VOL] knob. Audio Setup Setting the Sound system. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob. Low Pass Filter Adjustment Item Display Range “LPF” 80/120/160/Through(OFF) Hz Volume offset “V-OFF”/ “V-OF” –8 — ±0 (AUX: -8 — +8) . • Volume offset: Sets each source’s volume as a difference from the basic volume. 4 Adjust the Audio setup item Turn the [VOL] knob. 5 Exit Audio Setup mode Press the [VOL] knob for at least 1 second. Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the “STANDBY”/ “STBy” display. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Speaker type Turn the [VOL] knob. Speaker type Display OFF “SP OFF”/ “SP-F” For 5 & 4 in. speaker “SP 5/4”/ “SP-5” For 6 & 6x9 in. speaker “SP 6*9/6”/ “SP-6” For the OEM speaker “SP OEM”/ “SP-O” 4 Exit Speaker Setting mode Press the [VOL] knob. Function of KDC-MP439/KDC-MP3039/KDC-MP339/ KDC-MP239 Switching Display Changing the information displayed. 1 Enter Switching Display mode Press the center of the Control knob for at least 1 second. “DISP SEL” is displayed. 2 Select the Display item Press the right or left side of the Control knob. In Tuner source Information Display Frequency “FREQ” Clock “CLOCK” 6 | KDC-MP439/KDC-MP3039/KDC-MP339/KDC-MP239/KDC-139 In CD & External disc source Information Display Disc title “D-TITLE” Track title “T-TITLE” Play time & Track number “P-TIME” Clock “CLOCK” In Audio file source Information Display Music title & Artist name “TITLE” Album name & Artist name “ALBUM” Folder name “FOLDER” File name “FILE” Play time & Music number “P-TIME” Clock “CLOCK” In Standby/ Auxiliary input source Information Display Source name “SRC NAME” Clock “CLOCK” 3 Exit Switching Display mode Press the center of the Control knob. . • When you select the clock display, the display setting of each source will be changed to the clock display. • Album name cannot be displayed in WMA file. • If the selected display item does not have any information, alternative information is displayed. English | 7 Tuner Operation Frequency Step Setting Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. 1 Turn the power OFF Press the [SRC] button for at least 1 second. 2 Switch the freq...
)
