Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the shaft on the unit with the depression on the faceplate. English | 17 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. 18 | English Tuner features Tuning Mode Choose the tuning mode. Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek "Auto 1" Automatic search for a station. Preset station seek "Auto 2" Search in order of the stations in the Preset memory. Manual "Manual" Normal manual tuning control. Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [4] or [.] button. • During reception of stereo stations the "ST" indicator is ON. Function of remote Direct Access Tuning Entering the frequency and tuning. 1 Select the band Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote. "– – – –" is displayed. 3 Enter the frequency Press the number buttons on the remote. 1 – 6 SRC AUTO/AME 4 FM . AM Band display Preset station number Frequency display English | 19 Example: Desired frequency Press button 92.1 MHz (FM) [0], [9], [2], [1] 810 kHz (AM) [0], [8], [1], [0] Canceling Direct Access Tuning Press the [DIRECT] button on the remote. Station Preset Memory Putting the station in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [4] or [.] button. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. Preset Tuning Calling up the stations in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the desired [1] — [6] button. 20 | English CD/MP3/WMA/External disc control features Playing CD & MP3/WMA When there is no disc inserted 1 Open the panel to insert disc Press the [0] button. 2 Insert a disc. • When the faceplate has been slid open, it might interfere with the shift lever or something else. If this happens, pay attention to safety and move the shift lever or take an appropriate action, then operate the unit. • When a disc is inserted the "IN" indicator is ON. When a disc is inserted Press the [SRC] button. Select the "CD" display. Pause and play Press the [38] button. Each time the button is pressed the song pauses or plays. Eject the disc 1 Eject the disc Press the [0] button. 2 Return the panel to the original position Press the [0] button. • 3 in. (8cm) disc can’t be played. Using an adapter and inserting them into this unit can cause damage. • The MP3/WMA media that this unit can play are CDROM, CD-R, and CD-RW. The medium formats must be ISO 9660 Level 1, Level 2, Joliet, or Romeo. The methods and precautions to be followed for writing MP3/WMA data are covered in 'Notes on playing MP3/WMA' (page 8). Check that section before creating your MP3/WMA media. SCAN RDM F.SEL M.RDM DISP /3 REP 38 SRC 0 . 4 FM AM English | 21 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD 2" CD player "CD CH" CD changer "MD CH" MD changer Pause and play Press the [38] button. Each time the button is pressed it pauses and plays. • The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. Fast Forwarding and Reversing Fast Forwarding Hold down on the [.] button. Release your finger to play the disc at that point. Reversing Hold down on the [4] button. Release your finger to play the disc at that point. Track/File Search Searching for a song on the disc or in the MP3/ WMA folder. Press the [4] or [.] button. Function of disc changer/ MP3/ WMA Disc Search/Folder Search Selecting the disc set in the Disc changer or the folder recorded on the MP3/WMA media...
Este manual também é adequado para os modelos :Unidade - KDC-MP6025 (822.04 kb)
Unidade - KDC-X679 (822.04 kb)