Log:
Assessments - 3, GPA: 4.3 ( )

Instruções de Operação Kenwood, Modelo KDC-W4531

Fabricante : Kenwood
Arquivo Tamanho: 604.56 kb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :
Unidade - KDC-W4531 (737.8 kb)ru
Unidade - KDC-W4531 (733.05 kb)ru

Facilidade de uso


. The antenna control wire is not connected. . Connect the wire correctly, referring to the section on . 30 | English Disc source ? "AUX EXT" is displayed without achieving External disc control mode. . Unsupported disc changer is connected. . Use the disc changer mentioned in the (page 3) of the section on . ? The specified disc does not play, but another one plays instead. . The specified CD is quite dirty. . Clean the CD. . The disc is loaded in a different slot from that specified. . Eject the disc magazine and check the number for the specified disc. . The disc is severely scratched. . Try another disc instead. ? A CD ejects as soon as it is loaded. . The CD is quite dirty. . Clean the CD, referring to the CD cleaning of the section on (page 5). ? Can’t remove disc. . The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. . The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. ? The disc won’t insert. . There’s already another disc inserted. . Press the [0] button and remove the disc. ? Direct Search can’t be done. . Another function is ON. . Turn Random Play or other functions OFF. ? Track Search can’t be done. . For the discs/folders first or last song. . For each disc/folder, Track Search can’t be done in the backward direction for the first song or in the forward direction for the last song. MP3/WMA source ? Cannot play an MP3/WMA. . The media is scratched or dirty. . Clean the media, referring to the CD cleaning of the section on (page 5). ? The sound skips when an MP3/WMA is being played. . The media is scratched or dirty. . Clean the media, referring to the CD cleaning of the section on (page 5). . The recording condition is bad. . Record the media again or use another media. ? The MP3/WMA track time isn’t displayed correctly. . --- . There are times when it isn’t displayed correctly according to the MP3/WMA recording conditions. If the following situations, consult your nearest service center: Even though the disc changer is connected, the Disc Changer source is not ON, with "AUX EXT" showing in the display during the Changer Mode. Troubleshooting Guide English | 31 The messages shown below display your systems condition. EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. . Load the disc magazine properly. No CD in the unit. . Insert the CD. NO DISC: No disc has been loaded in the disc magazine. . Load a disc into the disc magazine. TOC ERR: No disc has been loaded in the disc magazine. . Load a disc into the disc magazine. The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot. . Clean the CD and load it correctly. E-05: The CD is upside-down. . Load the CD correctly. BLANK: Nothing has been recorded on the MD. NO TRACK: No tracks are recorded on the MD, although it has a title. E-15: Media was played that doesn’t have data recorded that the unit can play. . Use media that has data recorded that the unit can play. NO PANEL: The faceplate of the slave unit being connected to this unit has been removed. . Replace it. E-99: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. . Check the disc magazine. And then press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center. HOLD: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. . Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. LOAD: Discs are being exchanged in the Disc changer. READING: The unit is reading the data on the disc. IN (Blink): The CD player section is not operating properly. . Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center. NA FILE: A MP3/WMA is played with a format that this unit can’t support. . ---- COPY PRO: A copy-protected file is played. . ---- 32 | English FM tuner section Frequency range (50 kHz space) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 .V /75 . Quieting Sensitivity (S/N = 46dB) : 1.6 .V /75 . Frequency response (±3.0 dB) : 30 Hz – 15 kHz Signal to Noise ratio (MONO) : 65 dB Selectivity (DIN) (±400 kHz) : . 80 dB Stereo separation (1 kHz) : 35 dB MW tuner section Frequency range (9 kHz space) : 531 kHz – 1611 kHz Usable sensitivity (S/N = 20dB) : 25 .V LW tuner section Frequency range : 153 kHz – 281 kHz Usable sensitivity (S/N = 20dB) : 45 .V CD player section Laser diode : GaAlAs Digital filter (D/A) :...

Este manual também é adequado para os modelos :
Unidade - KDC-3031A (604.56 kb)
Unidade - KDC-3031G (604.56 kb)
Unidade - KDC-309A (604.56 kb)
Unidade - KDC-309G (604.56 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias