Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
• The password’s initial value is 7890. • If the password doesn’t match, return to the “ Setup Menu” . • Pressing the Reset button erases the password. 3 Press the [ ENTER ] button. Setting the Parental Level: 1 Press the each the [ 5 or . ] buttons to change the parental set level. " UNLOCKED " (Default setting) Cancelling the parental lock. " 8 " Plays any software (including adult-, general- and children- oriented) . " 7 " -" 2 " Plays general- and children-oriented DVD software. Restricts playback of adult-oriented DVD software. " 1 " Plays children-oriented software. Restricts playback of adult and general-oriented DVD software. NOTE Parental level varies with the discs. 2 Press the [ ENTER ] button. To change the password: — 44 — NOTE • Some discs may request that you change the rating level set in the default settings during playback. In this case, the rating level setup screen is displayed, if you do not input the correct password either playback does not continue or a picture for a different rating level is played. • Write down the password on a piece of paper and store the piece of paper somewhere in case you forget it. • On undated DVDs, playback will not be restricted even if the rating level is set. • Once set, this rating level remains in memory until changed. To enable the play of discs of higher rating levels or to cancel the parental lock, the setting must be changed. • Not all DVDs provide a Parental Lock feature. If you are unsure about a DVD, play it first to confirm. Do not leave DVDs accessible to young children for whom you deem them inappropriate. Setting the Optical Output Mode OUT) Setting the Optical Output Mode OUT) 1 Press the each the [ 5 or . ] buttons to select the “ AUDIO” . Press the [ ENTER ] button. 2 Press the each the [ 5 or . ] buttons to select the “ DIGITAL OUT” . Press the [ ENTER ] button. 3 Each time you press the [ 5 or . ] buttons, the mode switches as follows: " STREAM " (Default setting) Select this when connected to an amp (decoder) that supports Dolby Digital. " LPCM " It’s converted to a 48 KHz/16 bit linear PCM signal and output. Select this when connected to a device that doesn’t support Dolby Digital. " OFF" Select when not connected to digital output. 4 Press the [ ENTER ] button. Selecting the Dynamic Range Control (D.R.C) 1 Press the each the [ 5 or . ] buttons to select the “ AUDIO” . Press the [ ENTER ] button. 2 Press the each the [ 5 or . ] buttons to select the “ D.R.C” . Press the [ ENTER ] button. 3 Each time you press the [ 5 or . ] buttons, the mode switches as follows: " FULL " For the regular sound " STANDARD " (Default setting) For more powerful sound at regular volumes " NIGHT" For powerful sound at low volumes NOTE This select can be made when the Dolby Digital 4 Press the [ ENTER ] button. Setting the Audio During 2x Search Setting the 2x-speed Normal Sound Play function. 1 Press the each the [ 5 or . ] buttons to select the “ AUDIO” . Press the [ ENTER ] button. 2 Press the each the [ 5 or . ] buttons to select the “ AUDIO DURING*2” . Press the [ ENTER ] button. 3 Each time you press the [ 5 or . ] buttons, the mode switches as follows: " ON " (Default setting) The 2x-speed Normal Sound Play function is ON. " OFF " The 2x-speed Normal Sound Play function is OFF. 4 Press the [ ENTER ] button. — 45 — DVD/VCD/CD Setup Menu DVD/VCD/CD Setup Menu English Setting the Screen Mode Setting the Colour Scheme Use the procedure described below to set 1 Press the each the [ 5 or . ] buttons to select the “ PICTURE” . Press the [ ENTER ] button. 2 Press the each the [ 5 or . ] buttons to select the “ TV SCREEN” . Press the [ ENTER ] button. 3 Each time you press the [ 5 or . ] buttons, the mode switches as follows: " 4:3 LETTERBOX " Wide-screen software with pan & scan specification is played in a letter box screen (with black stripes on the top and bottom). " 4:3 PAN-SCAN " (Default setting) Wide-screen software with pan & scan specification is played in a panned & scanned screen (with the left and right sides cut off). " 16:9 WIDE " Set the picture mode of the wide-screen monitor to “ FULL” 4 Press the [ ENTER ] button. Setting the On Screen Display colour. 1 Press the each the [ 5 or . ] buttons to select the “ PICTURE” . Press the [ ENTER ] button. 2 Press the each the [ 5 or . ] buttons to select the “ COLOR SCHEME” . Press the [ ENTER ] button. 3 Each time you press the [ 5 or . ] buttons, the mode switches as follows: " Yellow " The colour is yellow. " Green " The colour is green. " Blue " (Default setting) The colour is blue. " Red " The colour is red. 4 Press the [ ENTER ] button. — 46 — — 47 — Setting the reference point when zooming and the amount of movement when scrolling. Press the each the [ 5 or . ] buttons to select the “PICTURE”. Press the [ ENTER ] button. Press the each the [ 5 or . ] buttons to select the “ZOOM SETUP”. Press the [ ENTER ] button. Press the each the [ 5 or . ] buttons to select the “START POINT”.or “PAN SCALE” Pr...