Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Removing the front panel 1 Press DETACH to release the front panel. 2 Grab the front panel and remove. 3 Put the front panel into provided protective case for safe keeping. Attaching the front panel 1 Slide the front panel to the left until it clicks. Front panel and the head unit are jointed on the left side. Make sure that the front panel has been jointed to the head unit. 2 Press the right side of the front panel until it is firmly seated. # If you can’t attach the front panel to the head unit successfully, try again. Front panel may be damaged if you attach the front panel forcedly. 4 En Section Operating this unit 02 1456789abc23deEnglish What’s What Head unit 1 AUDIO button Press to select various sound quality controls. 2 EQ button Press to select various equalizer curves. 3 SOURCE button, VOLUME This unit is turned on by selecting a source. Press to cycle through all the available sources. Press and hold to recall the initial setting menu when the sources are off. Rotate it to increase or decrease the volume. 4 Disc loading slot Insert a disc to play. 5 EJECT button Press to eject a CD from your built-in CD player. 6 TA button Press to turn TA function on or off. Press and hold to turn AF function on or off. 7 AUX input jack (3.5 mm stereo jack) Use to connect an auxiliary equipment. 8 DETACH button Press to remove the front panel from the head unit. 9 DISPLAY button Press to select different displays. a LOUD button Press to turn loudness on or off. b 1 to 6 buttons Press for preset tuning. c a/b/c/d buttons Press to perform manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. d BAND button Press to select among MW/LW and two FM bands and cancel the control mode of functions. Press and hold to turn regional function on or off. e FUNCTION button Press to recall the function menu when operating a source. 5 En Section 02 Operating this unit Optional remote control f d g c h e 1 The remote control CD-SR100 is sold separately. Operation is the same as when using the buttons on the head unit. See the explanation of the head unit about the operation of each button with the exception of ATT, which is explained below. f ATT button Press to quickly lower the volume level, by about 90%. Press once more to return to the original volume level. g SOURCE button Press to cycle through all the available sources. Press and hold to turn the source off. h VOLUME button Press to increase or decrease the volume. LCD display 1 2 3 56 78 9a 4 1 Main display section Shows the various information such as band, play time, and other setting. ! Tuner Band and frequency are displayed. ! RDS Program service name, PTY information or frequency is displayed. ! Built-in CD Player (Audio CD) Erapsed play time is displayed. ! Built-in CD Player (WMA/MP3/WAV disc) Folder number and erapsed play time are displayed. ! Audio and initial setup Function names and setup status are displayed. 2 Preset number/track number indicator Shows the track number or preset number. ! If a track number 100 or more is selected, d on the left of the track number indicator will light. 3 AF indicator Shows when AF (alternative frequencies search) function is on. 4 TP indicator Shows when a TP station is tuned in. 5 TA indicator Shows when TA (traffic announcement standby) function is on. 6 MP3/WMA indicator Shows the type of the currently playing disc. 6 En Section Operating this unit 02 7 RPT indicator Shows when repeat play is turned on. 8 LOUD indicator Appears in the display when loudness is turned on. 9 Stereo (5) indicator Shows when the selected frequency is being broadcast in stereo. a LOC indicator Shows when local seek tuning is on. Basic Operations Turning the unit on and selecting a source You can select a source you want to listen to. To switch to the built-in CD player, load a disc in the unit (refer to page 10). % Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources: Tuner—Built-in CD player—AUX Notes ! In the following cases, the sound source will not change: — When there is no disc in the unit. — When the AUX (auxiliary input) is set to off (refer to page 14). ! AUX is set to on by default. Turn off the AUX when not in use (refer to Switching the auxiliary setting on page 14). ! When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off. Adjusting the volume % Use VOLUME to adjust the sound level. Turning the unit off % Press SOURCE and hold until the unit turns off. Tuner Listening to the radio 1 Press SOURCE to select the tuner. 2 Press BAND to select a band. Press BAND until the desired band (F1, F2 for FM or MW/LW) is displayed. 3 To perform manual tuning, briefly press c or d. 4 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies...