Assessments - 7, GPA: 3.9
(
)
)
|
Facilidade de uso
Press POWER button and hold for 2 seconds to turn the power off. Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the unit on it will resume the stored status which you set. Volume control Rotate VOL knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume level. Setting the sound characteristics Press SEL button repeatedly to select the audio modes: VOLUME => BASS => TREBLE => BALANCE L-R => FADER R-F. Rotate VOL knob to adjust each mode. Clock setting The clock can be set anytime when the power is on. Press CLK button and then press and hold CLK button for 3 seconds, the time will blink on the display. 1. Rotate VOL knob clockwise to adjust the hour. 2. Rotate VOL knob anti-clockwise to adjust the minute. 3. Press CLK button again or leave the unit idle for new setting to take effect. 11 Press CLK button anytime to view the time display. Setting other characteristics Press and hold for 2 seconds the SEL button to select the modes: TA SEEK/TA ALARM => PI SOUND/MUTE => RETUNE S/L => MASK DPI/ALL => BEEP ALL/2ND/OFF=> SEEK => AUDIO DSP (POP/FLAT/POP/CLASSIC/ROCK)=> LOUDNESS ON/OFF=> STEREO / MONO=> LOCAL/DX => VOL ADJ/LAST => ESP. The display will show the following picture: a. TA (Traffic Announcement) SEEK MODE To determine what action will the radio take if the newly tuned station does not receive TP (Transport Program) information for 5 seconds. Rotate the VOL knob to select the desired mode: TA ALARM and TA SEEK. - TA SEEK: when newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station which has not the same station (PI - Program Information) as the last station, but has the TP information. When TP information gets lost at the current station for retune time which is set by RETUNE SHORT (60 seconds) or RETUNE LONG (90 seconds), the radio starts to retune to next same PI station. When same PI station does not catch in 1 cyclic search, the radio retunes to next station with TP information. - TA ALARM: during searching the radio does not retune but the double beep sound (alarm) is output. b. PI SOUND/MUTE Choose PI sound or mute. PI sound refers to the reception noise when the AF function tries to scan alternative frequency. c. RETUNE MODE To determine the initial time of automatic TA search. Rotate the VOL knob to select the desired mode: RETUNE L and RETUNE S. - RETUNE L: 90 seconds. - RETUNE S: 30 seconds. Note: Retune mode is active for TA SEEK mode only. 12 d. MASK DPI MODE Rotate the VOL knob to select the desired mode: MASK DPI or MASK ALL. - MASK DPI: masked only the AF which has different PI. - MASK ALL: masked the AF which has different PI and any other interfering non PI station which having the same transmitting frequency. e. BEEP MODE Rotate the VOL knob to select the desired mode: ON or OFF. - BEEP OFF: disable audible beep tone when any function is accessed. - BEEP ON: enable audible beep tone. f. SEEK MODE Rotate the VOL knob to select the desired mode: SEEK 1/ SEEK 2. - SEEK1: Press the Tuning up/ down button briefly to increase or decrease the frequency by 1 step size. Press and hold the Tuning up/ down button to seek the band in up or down direction and stop when a station is received. - SEEK2: Press the Tuning up/ down button briefly to increase or decrease the frequency by 1 step size. Press and hold the Tuning up/ down button increase or decrease the frequency rapidly until the button is released, the different between the same operation at Seek 1 mode is that this time the radio will not stop at any station. g AUDIO DSP MODE Rotate the VOL knob to select the desired equalizer mode: DSP OFF => FLAT => POP M => CLASSICS => ROCK. h LOUDNESS MODE Rotate the VOL knob to select the desired mode: ON or OFF. i STEREO MODE Rotate the VOL knob to select the desired mode: STEREO or MONO reception for FM radio stations. You can sometimes improve reception of distant stations by selecting Mono mode. j LOCAL MODE Rotate the VOL knob to select the desired mode: LOCAL or DISTANT (DX) tuning mode. Local mode improves reception in some areas where the signal is too strong. 13 k Volume mode Select the mode: VOL ADJUST to adjust the volume level (10-50). l ESP MODE (Electronic Shock Protection) Rotate the VOL knob to select the desired mode: ESP 6 or ESP 25. - ESP 6 second: for normal road condition. - ESP 25 second: for road condition extremely unusual. Turning the sound off Press the MUTE button to turn the sound off. Press it again to turn the sound on. Mode setting Press the MODE button repeatedly to select TUNER => DISC => USB/SD/MMC => AUX. 14 Digital tuner operations_ Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Band selection Press the MODE button to select TUNER. Pr...