Log:
Assessments - 8, GPA: 4.3 ( )

Instruções de Operação Hyundai, Modelo H-CMD7075

Fabricante : Hyundai
Arquivo Tamanho: 1.32 mb
Arquivo Nome : Hyundai-H-CMD7075-Pdf-Rus.Pdf
Língua de Ensino: ruen
Fotos e especificações  Hyundai  H-CMD7075
Ir para baixar



Facilidade de uso


Press and hold it to set the time. PRESET STATION [1-6] BUTTONS PAL => PAL60 => AUTO. Use this button to turn the Subwoofer output ON. 13. POWER BUTTON Press it to turn the power on/off. 14. AUX IN 15. APS BUTTON In Radio mode press it to scan the preset memorized stations. Press it and hold for 2 seconds to store the programs with the best reception into preset buttons automatically. 16. USB socket 17. SD/MMC socket 18. MUTE BUTTON Press it to switch the sound off/on. 19. VOL KNOB / SEL BUTTON 9 Rotate it clockwise to increase the volume level; rotate anticlockwise to decrease the volume level. Press it repeatedly to select the mode: VOL => BAS => TRE => BAL => FAD => LOUD => LOC => ST => EQ. Rotate VOL knob to adjust each mode. 20. LCD (LIQUID CRYSTAL DISPLAY) 21. Disc slot 22. TUN TRK KNOB / MOD BUTTON Rotate it to adjust the radio frequency. Press it to choose the mode: RADIO => DISC => USB => CARD => AUX. 23. EJECT BUTTON Press it to eject a disc. 24. AF BUTTON Press it to active the AF function. Back of the front panel Press the OPEN button to open the panel. Disc slot Panel status indicator Reset hole Note: Pressing the RESET hole will erase the clock setting and stored stations. Panel status indicator lights up when you slide the panel down; flashes when you remove the panel. 10 Remote control 1. MODE BUTTON 2. POWER BUTTON 3. BND/T A/SYS BUTTON 4. ERROR BUTTONS 5. ENTER BUTTON 6. STOP/REVERSE BUTTON 7. AMS/RPT BUTTON 8. ST/PROG BUTTON 9. LOC/AF/RDM BUTTON 10. VOL +/- BUTTON 11. PBC BUTTON 12. OSD BUTTON 13. DIGIT AREA 14. PLAY/PAUSE BUTTON 15. MUTE BUTTON 16. TITLE BUTTON 17. SUB-T BUTTON 18. SETUP BUTTON 19. ANGLE BUTTON 20. SLOW BUTTON 21. ZOOM BUTTON 22. SEL BUTTON 23. SEEK +/- / m/»l BUTTONS 24. AUDIO BUTTON f 25. GOTO BUTTON 1 Changing the battery 1. Press the catch and at the same time pull out the battery tray. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing upward. Insert the battery tray into the remote control. 11 General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press OPEN button and remove the panel, then press the RESET button to restore the unit to the original factory settings. Power button Press any button to turn the unit on. Press the POWER button to switch the unit off. Note: After the unit is off, the clock, volume level and radio current settings will be memorized, and when you turn the unit on it will resume the stored status you set. Volume adjustment Rotate VOL knob on the panel clockwise or press the VOL+ button on the RC to increase the volume level; rotate anticlockwise or press VOL- to decrease the volume level. Mute function Press the MUTE button to cancel the sound. Press again to resume. Mode selecting Press the MOD button (TUN knob) on the front panel or MODE button on RC repeatedly to select the mode: RADIO => DISC (the type of disc inserted) => USB (if any is inserted) => CARD (the type of card inserted). Subwoofer control Press and hold the BAND/ NP/ SUB button on the panel to turn the Subwoofer output ON. An external amplifier is required to operate a subwoofer. 12 Sound settings Press SEL button shortly and repeatedly to select the mode: VOL => BAS => TRE => BAL => FAD => LOUD => LOC => ST => EQ. Rotate the VOL knob or use VOL +/- buttons to adjust each mode. • VOLUME: 00, 02,......, 44, 46 • BASS/TREBLE: -6, -5,......, 0, +1, +2,......+5, +6 • BALANCE: 12L, 11L,......, L=R, 1R,......,12R • FADER: 12R, 11R,......, R=F, 1F,......, 12F • LOUD: ON/OFF • LOC: LOC ON, LOC OFF (DX). • ST: STEREO, MONO • EQ: CLASS, POP, ROCK, FLAT, OFF Note: In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last display mode of radio or disc playback mode. Clock display and adjustment 1. Press the PTY/CLK button on the panel to show the time on the display. 2. Press and hold it, the hour will blink. 3. Rotate the VOL knob on the panel to adjust the hour. 4....


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias