Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
5 Finish the setting. 2 Select the PSM item you want to adjust. (See the table below.) Preferred Setting Mode (PSM) items • For detailed operations of each PSM items, refer to the pages listed in the table. Indications Selectable values/items Factory-preset settings See page CLOCK H Hour adjustment Back Advance 0:00 6 CLOCK M Minute adjustment Back Advance LEVEL Level display AUDIO 1 «_► AUDIO 2 OFF AUDIO 2 24 TEL Telephone muting MUTING 1 4_> MUTING 2 ^ OFF +3 OFF 24 SCROLL Scroll mode ONCE «_► AUTO t*. OFF «Jf ONCE 24 TAG DISP Tag display TAG ON TAG OFF TAG ON 24 23 ENGLISH ENGLISH To select the level meter—LEVEL You can select the level display according to your preference. When shipped from the factory, “AUDIO 2” is selected. • AUDIO 1: Shows the audio level indicator. • AUDIO 2: Alternates “AUDIO 1” setting and illumination display. • OFF: Erases the audio level indicator. To select the telephone muting—TEL This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2” whichever mutes the sounds from this unit. When shipped from the factory, this mode is deactivated. To turn the tag display on or off—TAG DISP An MP3 file can contain file information called “ID3 Tag” where its album name, performer, track title, etc. are recorded. There are two versions-ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2). This unit is compatible only with ID3v1. When shipped from the factory, “TAG ON” is selected. • TAG ON: Turns on the ID3 tag display while playing MP3 files. • If an MP3 file does not have ID3 tags, folder name and file name appear. • TAG OFF: Turns off the ID3 tag display while playing MP3 files. (Only the folder name and file name can be shown.) MUTING 1: Select this if this setting can mute the sounds. MUTING 2: Select this if this setting can mute the sounds. OFF: Cancels the telephone muting. To select the scroll mode—SCROLL You can select the scroll mode for the disc information (when the entire text cannot be shown all at once). When shipped from the factory, scroll mode is set to “ONCE.” • ONCE: Scrolls only once. • AUTO: Repeats the scroll (5-second intervals in between). • OFF: Cancels scroll mode. Note: Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP (display) for more than one second. 24 Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. 1 Unlock the control panel. 2 Lift and pull the control panel out of the unit. 3 Put the detached control panel into the provided case. Attaching the control panel 1 Insert the left side of the control panel into the groove on the panel holder. 2 Press the right side of the control panel to fix it to the panel holder. Note on cleaning the connectors: If you frequently detach the control panel, the connectors will deteriorate. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connectors 25 ENGLISH ENGLISH What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. General Connections are incorrect. Check the cords and connections. • This unit does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. While holding SEL (select), press 6/I/ATT (standby/on/ attenuator) for more than 2 seconds to reset the unit. (The clock setting and preset stations stored in memory are erased.) (See page 2.) FM/AM • SSM (Strong-station Sequential Memory) automatic preset does not work. Signals are too weak. Store stations manually. • Static noise while listening to the radio. The aerial is not connected firmly. Connect the aerial firmly. • Disc automatically ejects. Disc is inserted upside down. Insert the disc correctly. • CD-R/CD-RW cannot be played back. • Tracks on the CD-R/CD-RW cannot be skipped. CD-R/CD-RW is not finalized. • Insert a finalized CD-R/ CD-RW. • Finalize the CD-R/CD-RW with the component which you used for recording. • Disc can be neither played back nor ejected. Disc is locked. Unlock the disc. (See page 13.) Disc Playback The CD player may function incorrectly. While holding (!)/I/ATT (standby/on/attenuator), press 0 (eject) for more than 2 seconds. Be careful not to drop the disc when it is ejected. • Disc sound is sometimes interrupted. You are driving on rough roads. Stop playback while driving on rough roads. Disc is scratched. Change the d...