Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
The display will show a message "WELCOME". Press and hold PWR button to switch the unit off. Note: After the unit is off, volume level and radio current settings will be memorized, and when you turn the unit on it will resume the stored status you set. Volume control Rotate VOL knob on the faceplate. The larger the number shown on the display is, the higher the volume level is. Sound settings Press SELECT button shortly and repeatedly to select a mode: VOL => BAS => TRE => BAL => FAD. Rotate VOL knob to adjust each mode. • VOLUME: 00, 02,......, 47 • BASS/TREBLE: -7, -5,......, 0, +1, +2,......+ 5, +7 • BALANCE: 10L,......, 10R • FADER: 10R,...., 10F Note: When DSP is on, bass and treble adjustment is not available. Caution: In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last display mode of radio or disc playback mode. Mode selection Press MODE button to cycle the play mode: AUX => TUNER => DISC. Note: DISC mode will only show on the display when a disc is inserted into the unit. Mute function Press MU button to cancel the sound. Press it again or adjust the volume level to resume the sound. Clock setting Press DISP button until clock is shown, press the DISP button and hold for 2 seconds. Time will start blinking. 11 Rotate the VOL knob clockwise to adjust hour. Rotate the VOL knob anticlockwise to adjust minute. Press DISP button again to save setting. Loudness Press and hold SELECT button then press it repeatedly to select LOUD OFF (LOUD ON). If LOUD ON i s displayed, it means that Loudness function is activated. This function is useful if you need to decrease the volume without loss of sound quality. To disable the function, select LOUD OFF with VOL knob. Equalizer (DSP) mode Press and hold SELECT button then press it repeatedly to select DSP OFF. Rotate VOL knob to choose an equalizer effect: POP => ROCK => CLASS => FLAT => DSP OFF. After you have reached your desired effect, leave the unit idle in order for the new setting to take effect. Beep Press and hold SELECT button then press it repeatedly to select BEEP OFF (BEEP ON). Rotate VOL knob to toggle between BEEP ON (beep sound will be heard when buttons are pressed) and BEEP OFF (no sound will be heard), then leave the unit idle for your desired setting to take effect. Information display Press DISP button repeatedly to switch between various information shown on the display, such as radio frequency, clock, track and other info depending on the playing mode. AUX in jack AUX-in jack is intended for connecting an external audio or video equipment to amplify the sound. If connection is made correctly, the audio signal from the external source will be translated through the acoustics of the head unit. This enables to adjust the volume and quality of sounding. For example, you can connect an MP3-player to listen to tracks using the car acoustic system. 12 Radio operations BAND selection Press repeatedly BAND button to select your desired radio band in radio mode: FM1, FM2, FM3, FM (OIRT), AM1 (MW1), AM2 (MW2). Each band can store 6 preset stations, for a total of 36 preset memory stations. Tuning Press PREVIOUS or NEXT button to manually adjust the radio frequency. Press and hold PREVIOUS/NEXT buttons, the radio will seek to the next up or down strong and clear frequency station automatically. Repeat this action to seek for other desired stations. To stop automatic search, press NEXT or PREVIOUS button. Automatic seek/preset scan • Preset scan: Press AS/PS button once to automatically search for saved stations in each band. • Automatic store: Press and hold AS/PS button, the receiver will automatically scan and save stations for the current band. As soon as automatic store is performed, the unit will start preset scanning. Radio scan Press SCAN button. The unit will scan all saved stations in each band holding 5 seconds on each station. Programming stations There are 6 numbered preset buttons, under which you can store and recall stations for each band. Select the needed station, then press and hold a preset button. The station will be saved in the memory under the corresponding number. To recall a stored station, press the corresponding preset button. Local/distant reception Press and hold SELECT button, then press it repeatedly to select DX (LOCAL). If LOCAL is displayed, it means that local station reception is activated. DX means that distant stations with both strong and weak signal are received. Switch between LOCAL and DX by rotating VOL knob. Mono/stereo reception (for FM radio) Press and hold SELECT button, then press it repeatedly to select STEREO reception or MONO reception for FM bands. Mono receptions enables achieve a better signal quality due to noise reduction. Switch between MONO 13 and STEREO by rotating VOL knob. RDS function RDS (Radio Data System) service availability varies with areas. Please understand that if RDS service is not a...