Log:
Assessments - 7, GPA: 4 ( )

Instruções de Operação Sony, Modelo XR-4300R

Fabricante : Sony
Arquivo Tamanho: 1.78 mb
Arquivo Nome :
Língua de Ensino: ruplentrcs
Ir para baixar



Facilidade de uso


Replace the battery with a new CR2025 lithium battery. x + side up Notes on lithium battery • Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. • Wipe the battery with a dry cloth to assure a good contact. • Be sure to observe the correct polarity when installing the battery. • Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. WARNING Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire. 6 Getting Started Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel and press the reset button with a pointed object, such as a ballpoint pen. Reset button Note Pressing the reset button will erase the clock setting and some memorised functions. Detaching the front panel You can detach the front panel of this unit to protect the unit from being stolen. 1 Press Coff). 2 Press (open), then slide the front panel to the right side, and pull out from the left side. Notes • Be sure not to drop the panel when detaching it from the unit. • If you detach the panel while the unit is still turned on, the power will turn off automatically to prevent the speakers from being damaged. • When you carry the front panel with you, use the supplied front panel case. Attaching the front panel Place the hole ® of the front panel onto the spindle ® on the unit as illustrated, then push the left side in. x Notes • Be careful not to attach the front panel upside down. • Do not press the front panel too hard against the unit when attaching it. • Do not press too hard or put excessive pressure on the display window of the front panel. • Do not expose the front panel to direct sunlight or heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight or where there may be a considerable rise in temperature. Caution alarm If you turn the car ignition off without removing the front panel, the caution alarm will beep for a few seconds. If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be deactivated. 7 Turning the unit on/off Turning on the unit Press (SOURCE) or insert a cassette in the unit. For details on operation, refer to page 10 (cassette player) and page 12 (radio). Turning off the unit Press (OFF) to stop tape playback or FM/ MW/LW reception (the key illumination and display remains on.) Press (OFF) for two seconds to completely turn off the unit. Note If your car has no ACC position on the ignition key switch, be sure to turn the unit off by pressing (off) for two seconds to avoid car battery wear. How to use the menu This unit is operated by selecting items from a menu. To select, first enter the menu mode and choose up/down (+/- of (PRST/DISC) or CPRST)), or choose left/right (-/+ of (SEEK/AMS)). (PRST/DISC)/(PRST) (+) : To select upwards (-) : To select downwards (SEEK/AMS) (-) : To select r leftwards V..X (+) : To select rightwards 8 Setting the clock 2 Press (ENTER). The clock uses a 24-hour digital indication. Example: To set the clock to 10:08 1 Press (menu), then press either side of (prst/disc) or (prSt) repeatedly until "CLOCK" appears. - jy-Jr CL OCK O Press (ENTER). iru-nto _tu tu a__ The clock starts. After the clock setting is complete, the display returns to normal playback mode. Tips • You can use the convenient CT function to set the clock automatically (page 19). • When the D.INFO mode is set to ON, the time is always displayed (page 22). 5ET '2_m. The hour indication flashes. © Press either side of (prst/disc) or (prst) to set the hour. e Press (+) side of (seek/ams). I/TA 5El I kd_>Mà_ The minute indication flashes. O Press either side of (prst/disc) or (prst) to set the minute. /T\ SET sd_¡Mà_ 9 Cassette Player Listening to a tape 1 Press (OPEN) and insert a cassette. Playback starts automatically. 2 Close the front panel. If a cassette is already inserted, to start playback, press (SOURCE) repeatedly until “FWD” or "REV” appears. The side facing up is played. FUH THPE The side facing down is played. u'* V ^ RE I' m \ \\mm THPE TiP To change the tape's playback direction, press (MODE) (OO Fast-winding the tape During playback, press and hold either side of (SEEK/AMS). Rewind Fast-forward To start playback during fast-forwarding or rewinding, press (MODE) (^O). Locating a specific track — Automatic Music Sensor (AMS) During playback, press either side of (seek/ams) momentarily for each track you want to skip. You can skip up to nine tracks at one time. To locate preceding tracks To locate succeeding tracks To Press Stop playback COff) Eject the cassette (OPEN) then Z Note The AMS function may not work when: — the blanks between tracks are shorte...

Este manual também é adequado para os modelos :
Unidade - XR-4200R (1.78 mb)
Unidade - XR-4300RV (1.78 mb)
Unidade - XR-4300RX (1.78 mb)
Unidade - XR-C5200R (1.78 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias