Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
It then returns to the previously selected station. The CT (Clock Time) data from the RDS transmission sets the clock automatically. 1 During radio reception, press (sel) and CD simultaneously. 2 Press CD repeatedly until "CT-ON" appears. The clock is set. r T. r/H I ^ L I U/tf °"s In two seconds the normal display automatically appears. To cancel the CT function Select "CT-OFF" in step 2. Notes • The CT function may not work even though an RDS station is being received. • There might be a difference between the time set by the CT function and the actual time. 14 Other Functions Changing the sound and display settings Adjusting the sound characteristics You can adjust the bass, treble, balance, and fader. You can store the bass and treble levels independently for each source. The following items can be set: • CT (Clock Time) (page 14). • A.SCRL (Auto Scroll)* (page 17). • M.DSPL (Motion Display) - the demonstration mode which appears when the tape is ejected and no source is selected (e.g., tuner is turned off). • BEEP - to turn the beep sound on or off. 1 Press (Sel). Select the item you want to adjust by pressing (sel) repeatedly. Each time you press (sel) , the item changes as follows: BAS (bass) t TRE (treble) t BAL (left-right) t FAD (front-rear) Adjust the selected item by pressing either side of the volume button. Adjust within three seconds after selecting the item. 2 Press the preset number button to select the desired item. Number buttons CD: CT (3): A.SCRL* ®: M.DSPL (6): BEEP * When no CD or MD is playing, this item will not appear (XR-CA300/CA310 only). Note The displayed item will differ depending on the 1 2 Attenuating the sound Press CATT). After “ATT-ON” momentarily flashes, the "ATT” indication appears in the display. To restore the previous volume level, press (ATT) again. “ATT-OFF” flashes momentarily. 3 Press the preset number button repeatedly to select the desired setting (Example: ON or OFF). Tip When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function). (XR-CA310/ illumination:green only) 15 Boosting the bass sound — D-bass You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal and high frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS button. Adjusting the bass curve Press (d-bass) repeatedly to select the desired bass curve. As the D-BASS number increases so does the effect. Selecting the sound position — "My Best sound Position” When you drive without passengers, you can enjoy comfortable sound environment by " My Best sound Position.” "My Best sound Position” has two presets, which adjusts the sound level of balance and fader. You can select one very easily with MBP button. Display window Balance Level Fader Level Right Left Front Rear MBP-A - 4dB 0 0 - 4dB MBP-B 0 - 4dB 0 - 4dB MBP-OFF 0 0 0 0 Press (mbp) repeatedly until the desired listening position. Mode of "My Best sound Position” will be shown in the display in order of the table. C 11 T) r m jt r 1JPH D.BASS-1 t D.BASS-2 t D.BASS-3 t D.BASS-OFF Note The bass sound may distort at same volume. If the bass sound distorts, select less effective bass curve. After one second, the display goes back to the normal playback mode. If you want to adjust the sound level of balance and fader more precisely, you can do it in (sel) button. (See "Adjusting the sound characteristics” on page 15.) 16 With Optional Equipment CD/MD Unit (XR-CA300/CA310 only) This unit can control external CD/MD units. If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. Playing a CD or MD 1 Press (source) repeatedly to select CD or MD. In case of tape playback, press Z to eject the tape. Automatically scrolling a disc name — Auto Scroll If the disc name, artist name, or track name on a CD TEXT disc or MD exceeds 8 characters and the Auto Scroll function is on, information automatically scrolls across the display as follows: • The disc name appears when the disc has changed (if the disc name is selected). • The track name appears when the track has changed (if the track name is selected). If you press (dspl) to change the display item, the disc or track name of the CD TEXT or MD disc is scrolled automatically whether you set the function on or off. 1 During playback, press (sel). 2 Press (3) repeatedly to select "A.SCRL-ON." 2 Press (MODE) until the desired unit To cancel Auto Scr°n, select ‘‘^^RL-OFF.1 appears. CD/MD playback starts. Note i, „ For some discs with very many characters, the following cases may happen: When a CD/MD unit is connec...
Este manual também é adequado para os modelos :Unidade - XR-CA310 (1.04 mb)
Unidade - XR-L200 (1.04 mb)
Unidade - XR-L210 (1.04 mb)