Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. Storing stations automatically — Best Tuning Memory (BTM) The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency. ./> control dial 1 Press (SOURCE) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Press (MENU), then rotate the ./> control dial until “BTM” appears. 4 Press the ./> control dial. A beep sounds when the setting is stored. Notes • If only a few stations can be received due to weak signals, some stored numbers will retain their former settings. • When a number is indicated in the display, the unit starts storing stations from the one currently displayed. Receiving the stored stations ./> control dial 1 Press (SOURCE) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Rotate the ./> control dial until you find the desired station. Tip Press the number button ((1) to (6)) on the card remote commander to select the stored station directly. If preset tuning does not work Press the –m or M+ button to search for the station (automatic tuning). Scanning stops when the unit receives a station. Repeat until the desired station is received. Tips • If automatic tuning stops too frequently, turn on the Local Seek to limit seek to stations with stronger signals (see “Changing the sound and display settings” on page 24). • If you know the frequency of the station you want to listen to, press and hold the –m or M+ button to locate the approximate frequency, then press the –m or M+ button repeatedly to fine adjust to the desired frequency (manual tuning). If FM stereo reception is poor Select monaural reception mode (see “Changing the sound and display settings” on page 24). The sound improves, but becomes monaural (“ST” disappears). Tip If FM broadcasts are difficult to hear, set DSO to off (page 25). Storing only desired stations You can manually preset desired stations. ./> control dial 1 Press (SOURCE) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Press the –m or M+ button to tune in the station that you want to store. 4 Press (MENU), then rotate the ./> control dial until “Preset Edit” appears. 5 Press the ./> control dial. 6 Rotate the ./> control dial to select the number that you want to store. 7 Press the ./> control dial. The stored station indication appears in the display. 8 Press (MENU) twice. Note If you try to store another station on the same stored number, the previously stored station will be erased. Operating with the card remote commander 1 Press (SOURCE) repeatedly to select the radio. 2 Press (MODE) repeatedly to select the band. 3 Press (SEEK -) or (SEEK +) to tune in the station that you want to store. 4 Press the desired number button ((1) to (6)) until “MEM” appears. Tuning in a station through a list — List-up ./> control dial 1 During radio r...