Log:
Assessments - 3, GPA: 4.3 ( )

Instruções de Operação Sirius Satellite Radio, Modelo SIR-ALP1

Fabricante : Sirius Satellite Radio
Arquivo Tamanho: 425.49 kb
Arquivo Nome : 6c9f90f9-8690-4ba2-8bea-f6726f2d6dce.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


• This product is not affiliated with Sirius Satellite Radio in any way. • There are no warranties expressed or implied by purchase of this product. • All boards are tested and verified 100% before shipping. • While every care has been taken to provide a quality product, I cannot guarantee the board to function correctly if installation is not done according to the instructions in this guide. • I am not liable for misuse of this product. Misuse includes improper installation, damage to the board or radio while trying to install, and illegal use of the modified radio. Tools needed: 1.Small Philips screwdriver (p1). 2.Elbow grease. 3.A double sided mirror. Screws already removed to save me some time. Using the small Philips screwdriver, remove the 7 screws in the SILVER case. (3 on each side, 1 on top) Page 1 of 13 Created On Tuesday, March 14, 2006 Sirius™ Connect USB interface board Installation Instructions Separate the two sections (neat engineering huh?) Page 2 of 13 Created On Tuesday, March 14, 2006 Sirius™ Connect USB interface board Installation Instructions Remove the top, and remove the pc board inside There are 4 screws that need to removed be removed. Install the new board. Secure with same screws. (Look, I even put some in.) Page 3 of 13 Created On Tuesday, March 14, 2006 Sirius™ Connect USB interface board Installation Instructions Begin assembling the radio… Page 4 of 13 Created On Tuesday, March 14, 2006 Sirius™ Connect USB interface board Installation Instructions Digital Audio & Analog Audio Out 12 Volts DC USB The left connector has analog audio on standard 1/8” (3.5mm) jack. A cable is provided. Also available on this same jack is optical digital audio; an adaptor is provided to allow use of standard Toslink cables. The center connector is the power supply for the tuner. Center pin is positive. The right connector is USB. When the suspend signal is sent from the computer, the tuner will power off, and draw very little current, this is to prevent battery drain. Supplied is a coax dc power plug. Use this in a CarPC environment. Again, center pin is the positive. Solder on 2 wires and connect center pin to 12VDC constant (yellow on standard PC power supplies). And the outer is of course ground (black on standard pc supplies). Page 5 of 13 Created On Tuesday, March 14, 2006 Sirius™ Connect USB interface board Installation Instructions Driver installation: Connect USB cable to PC. Select: Install from a list of specific location Click: Next Page 6 of 13 Created On Tuesday, March 14, 2006 Sirius™ Connect USB interface board Installation Instructions If your drivers are on your HD Set the location of the search. If your installing the Drivers from the CDROM supplied, check that box Click: Continue Anyway (I can’t afford Microsoft WHQL !) They are WHQL before I make the simple string name changes! Page 7 of 13 Created On Tuesday, March 14, 2006 Sirius™ Connect USB interface board Installation Instructions Click: Finish (another device will automatically detect) Click: Next Page 8 of 13 Created On Tuesday, March 14, 2006 Sirius™ Connect USB interface board Installation Instructions Same as above, click: Continue Anyway Click: Finish DONE! Page 9 of 13 Created On Tuesday, March 14, 2006 Sirius™ Connect USB interface board Installation Instructions My Sirius Communication soft will only supports Com1 – com9 (Yeah, I know…) So if I need to move com ports around (Who has more then 9 things?!) Use Device Manager. Windows Key - Break Right Click: MJS Sirius Interface -> Properties Page 10 of 13 Created On Tuesday, March 14, 2006 Sirius™ Connect USB interface board Installation Instructions Select Port Settings tab. Click: Advanced Page 11 of 13 Created On Tuesday, March 14, 2006 Sirius™ Connect USB interface board Installation Instructions Change to a new comport COM1 – COM9 Click OK and a bunch more OKs Page 12 of 13 Created On Tuesday, March 14, 2006 Sirius™ Connect USB interface board Installation Instructions Enjoy! Remember the tuner needs 12 Volts DC too! Use supplied plug, or Wall Wart! For support and software please visit Thanks for you purchase of this interface board -Mitch Thanks Alex for the wonderful application, Sirius Recorder. P.S. What exactly is a double sided mirror? And last time I checked, Home Depot sells elbow grease in isle 9. Page 13 of 13 Created On Tuesday, March 14, 2006 ...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias