Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
E
E
N
Installation Guide
N
G
G
L
L
I
I
S
S
❐ Before Installation
❐
H
Required Tools
H
11
WARNING
12
Warning
You’ll need the following:
≥ Do not install the monitor in a location which
12 V DC test
Electrical tape
Slide-cut
The installation information is designed for experienced installers and is not intended
obstructs driving, visibility or which is prohibited
bulb
pliers
for non-technical individuals. It does not contain warnings or cautions of the potential
by applicable laws and regulations.
If the monitor is installed in a location which
dangers involved in attempting to install this product.
obstructs forward visibility or operation of the air
Any attempt to install this product in a motor car by anyone other than a qualified
bag or other safety equipment or which interferes
installer could cause damage to the electrical system and could result in serious per-
with operation of the car, it may cause an acci-
dent.
sonal injury or death.
❐ Identify All Leads
≥ Never use bolts or nuts from the car’s safety
devices for installation.
The first step in installation is to identify all the car
If bolts or nuts from the wheel, brakes or other
wires you’ll use when hooking up your LCD monitor.
❐ Overview
❐ Installation Hardware
safety devices are used for installation of the mon-
As you identify each wire, we suggest that you label
itor, it may cause an accident.
it using masking tape and a permanent marker. This
This product should be installed by a professional.
No.
Item
Diagram
Q’ty
≥ Attach the wires correctly.
will help avoid confusion when making connections
(Please refer to the “WARNING” statement
If the wiring is not correctly performed, it may
later.
above.)
1
Display unit
1
cause a fire or an accident. In particular, be sure to
≥ Identify and label the car wires.
run and secure the lead wire so that it does not get
Note:
≥ Connect the car wires to the wires of the power
tangled with a screw or the moving portion of a
≥ Do not connect the power connector until you
connector.
2
Power connector
1
seat rail.
have made all connections. If there are no plastic
≥ Check the operation of the unit.
≥ Use with 12 V DC negative ground car.
caps on the hooking wires, insulate all exposed
This unit is only for use with a 12 V DC negative
leads with electrical tape until you are ready to use
If you encounter problems, please consult your
ground car. It cannot be used in large trucks or
them. Identify the leads in the following order.
3
Binding-head screw
nearest professional installer.
*
6
diesel cars which are 24 V DC car. If it is used in
the wrong type of car, it may cause a fire or an
Power Lead
accident.
Caution:
If your car has a radio or is pre-wired for one:
4
Screw sheet*
4
Cut the connector wires one at a time from the plug
≥ This unit operates with a 12 V DC negative
ground auto battery system only. Do not
Cautions:
(leaving the leads as long as possible) so that you
attempt to use it in any other system. Doing
≥ Use the specified fuse.
can work with individual leads.
so could cause serious damage.
For the professional installer:
Be sure to always use the specified fuse. If a
≥ There is a total of 6 holes for mounting the
fuse other than the specified fuse is used, it
screws: 4 holes where the display unit is
may cause a fire or an accident.
Before you begin installation, look for the following
opened and another 2 holes where the room
≥ Do not damage the cord by pinching or
items which are packed with your unit.
light cover is opened.
pulling it.
Turn on the ignition to the accessory position, and
≥ Warranty Card…Fill this out promptly.
*These are used for a trained technician to install
Do not pull or damage the cord. If the cord is
ground one lead of the test bulb to the chassis.
≥ Panasonic Servicenter List for Service Directory
this unit onto the supplied screw sheet
not treated properly, it will short out or be
Touch the other lead of the test bulb to each of the
…Keep for future reference in case the unit needs
(4 pieces) and binding-head screws (6 pieces).
severed and may cause a fire or an accident.
exposed wires from the radio connector plug. Touch
servicing.
≥ Take care to ensure that the cords connected
one wire at a time until you find the outlet that caus-
≥ Installation Hardware…Needed for monitor set-
above the roof panel are not pinched.
es the test bulb to light.
ting.
Now turn the ignition off and then on. If the bulb also
turns off and on, that outlet is the car power lead.
If your car is not wired for an audio unit:
Go to the fuse block and find the fuse port for acces-
sory (ACC), or ignition (IGN).
26
27
CY-VMX6800U
CY-VMX6800U
...