Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
Guardar este manual cerca de la Fasten the manual near the garage door after installation. puerta de la cochera. Se deben realizar revisiones Periodic checks of the opener are required to ensure safe operation. periodicas del abridor de puertas para asegurar su operacion segura. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A TABLE OF CONTENTS Introduction 2.7 Adjustment 27-29 Program the travel limits ...................... 27 Safety symbol review and signal word review ......... 2 Setting the force ............................. 28 Preparing your garage door ....................... 3 Tools needed .................................. 3 Test the safety reversal system ................. 29 Test The Protector System ®(safety sensors) ...... 29 Planning .................................... 4-5 Carton inventory ............................... 6 Operation 30-36 Hardware inventory ............................. 7 Operation safety instructions ................... 30 Using your garage door opener ................. 30 Assembly 8.11 Using the wall-mounted control console .......... 31 Assemble the rail and install the trolley .............. 8 Fasten the rail to the motor unit ................... 9 Care of your opener .......................... 32 To open the door manually .................... 32 Install the idler pulley ............................ 9 Battery backup .............................. 33 Install the belt and attach the belt cap retainer ....... 10 Set the tension ................................ 11 Having a problem (Troubleshooting) ............. 34 Diagnostic chart ............................. 35 Installation 11-26 LCD motion detecting control Installation safety instructions .................... 11 console messages ........................... 36 Determine the header bracket location ............. 12 Programming 37.38 Install the header bracket ....................... 13 To add or reprogram a hand-held remote control ...37 Attach the rail to the header bracket ............... 14 To erase all codes from motor unit memory ....... 37 Position the opener ............................ 15 3-Function remotes .......................... 37 Hang the opener .............................. 16 To add, reprogram or change a Install the control console ....................... 17 Keyless Entry PIN ........................... 38 Install the battery .............................. 18 Repair Parts 39-40 Install the lights ............................... 18 Rail assembly parts .......................... 39 Attach the emergency release rope and handle ...... 18 Installation parts ............................. 39 Electrical requirements ......................... 19 Motor unit assembly parts ..................... 40 Install The Protector System ®(safety sensors) .... 20-22 Accessories 41 Fasten the door bracket ...................... 23-24 Connect the door arm to the trolley ............. 25-26 Warran ty 41 Repair Parts & Service Back Cover INTRODUCTION Safety Symbol Review and Signal Word Review This garage door opener has been designed and tested to offer safe service provided it is installed, operated, maintained and tested in strict accordance with the instructions and warnings contained in this manual. When you see these Safety Symbols and Signal Words on the following pages, they will alert you to the Mechanical possibility of serious injury or death if you do not comply with the warnings that accompany them. The hazard may come from something mechanical or from electric shock. Read the warnings carefully. Electrical When you see this Signal Word on the following pages, it will alert you to the possibility of damage to your garage door and/or the garage door opener if you do not comply with the cautionary statements that accompany it. Read them carefully. Preparing your garage door Before you begin: • Disable locks. • Remove any ropes connected to garage door. • Complete the following test to make sure your garage door is balanced and is not sticking or binding: 1. Lift the door about halfway as shown. Release the door. If balanced, it should stay in place, supported entirely by its springs. 2. Raise and lower the door to see if there is any binding or sticking. If your door binds, sticks, or is out of balance, call a trained door systems technician. To prevent possible SERIOUSINJURYOR DEATH: • ALWAYScall a trained door systems technician if garage door binds, sticks, or is out of balance An unbalanced garagedoor may not reversewhen required • NEVERtry to loosen, move or adjust garagedoor, door springs, cables,pulleys,bracketsortheir hardware,allof which are under EXTREMEtension • DisableALL locks and removeALL ropes connectedto garagedoor BEFOREinstalling and operating garagedoor openerto avoid entanglement. To prevent damageto garage door and opener: • ALWAYSdisable locks BEFOREinstalling and operating the opener • ONLYoperategaragedooropenerat120V,60Hzto avoid malfunction and damage Sectional ...