Log:
Assessments - 2, GPA: 3 ( )

Instruções de Operação Advent, Modelo ADV10A

Fabricante : Advent
Arquivo Tamanho: 270.64 kb
Arquivo Nome : ADV10A_OM.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehicle occupants. If you have any questions regarding wire routing in a vehicle, please contact Audiovox Technical Support at 1-800-225-6074. When connecting power and ground in a mobile video installation ensure that the ACC wire is fused at the point where it is connected to the vehicle ACC wiring. Failure to do so can result in damage to the vehicle if a short circuit develops between the vehicle connection point and the mobile video product. An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle's parking brake is applied. An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver's seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Warnings • Do not use any solvents or cleaning materials when cleaning the video monitor. • Do not use any abrasive cleaners, they may scratch the screen. • Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. • Lock the LCD screen in the fully closed position when not in use. • Before putting on headphones always adjust the volume setting to the lowest position. • Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain the vehicle's battery. • Do not put pressure on the screen. • Caution children to avoid touching or scratching the screen, as it may become dirty or damaged. Licensed under one or more of the following patents, Patent NOS. 5,775,762 , 5,927,784 and 6,678,892 2 Congratulations Congratulations on your purchase of the ADVENT ADV10A DVD Player with drop-down video / monitor. TheADV10Ahas been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment. Note: Installation options vary, see the individual owner's manuals for each component in your system to obtain a full understanding of each component's operation. Safety Precaution For safety reasons, when changing video media it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat-belts to change video media or make any adjustments to the system. System adjustments can be accomplished using the remote control, while seat-belts remain fastened. Enjoy your ADVENT entertainment system but remember the safety of all passengers remains the number one priority. FEATURES • 10.1” TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor with LED Backlighting • Built-in DVD Player • OSD (On Screen Display) for Control of Picture Quality and Functions • Selectable (M1 and M2) IR Receive and Transmit Codes (See page 5.) • Switchable Dual Channel IR Infrared Transmitter (See page 5.) • Two Audio / Video Source Inputs ( DVD, AV1/AUX) • Dome Lights with Built-in Three Way Switch • Built-in 16 Channel Wireless FM Modulator • Last Position Memory for DVD • Screen Mode Selection (4:3, 16:9) • Full Function Remote Control • Backlit Controls • AV Output via RCA Jacks • Plays DVD, CD and MP3 Disc s 3 CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 1 2 3 4 5 6 7 8 9 10 11 12 1. POWER ( ) Control Used to turn the system on/off (standby). 2. Infrared Transmitter/Remote Sensor (Location) 3. Source Select (S) Use to select one of the two sources: DVD, AV1/AUX 4. PLAY ( ) Control This control is used to start playback of a disc. 5. STOP ( ) Control - Press STOP once: Stops playback, Pressing the PLAY button again will resume normal playback from where movie was stopped. - Press STOP twice and then press PLAY to start playback from the beginning of the DVD. 6. EJECT ( ) Control This control is used for ejecting disc from the disc compartment. 7. Three Position Dome Light Switch ON - Turns on the dome lights. OFF - The dome lights will not turn on in this position. AUTO - Automatically switches on the dome lights in conjunction with the vehicle's interior illumination. 8. Dome Lights Provide additional interior illumination. 9. Ventilation Openings 10. LCD Cut Off Switch Used to turn off the LCD ...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias