Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
FM Transmitter Function [FM-TX] You can use the FM transmitter function to hear the sound of the TV, video from your car FM radio. 1 Press the SCRN button for at least one second to switch to the setup menu screen. 2 Touch [ SYSTEM ] to switch to the system setting screen-1. 3 Touch [ 3 ] to switch to the system setting screen-2. FM Transmitter Function On and Off Touch the [ ON ] or [ OFF ] to switch the FM transmitter function on and off. [ON] : FM transmitter function is turned on [OFF]: FM transmitter function is turned off Adjusting the FM Transmitter Frequency When the FM transmitter function is turned on, you can switch the transmission frequency (87.5 MHz to 89.9 MHz) as follows: System setting screen-2 Touch the [ 3 ] to increase the frequency by 0.1 MHz step. Touch the [ 2 ] to decrease the frequency by 0.1 MHz step. RTN FM T X SYS E M T 87 . 5 MHz FM T X ON O F F BEEP OF F ON NOTE • Be sure to select a frequency that is not the same as a broadcast station in your area. • The “Auto Seek” function on your car radio may not stop at the FM transmitter frequency. In this case, use the “Manual Seek” function to set the radio to the FM transmitter frequency. 3 ¦ Securing to audio board ¦ Securing to pile carpet (Provided with the LZ-800W) Please do not install the unit near the dashboard, the rear tray, or other important components. Doing so could lead to injury or accident should the unit come off due to a shock and strike a person or an important component. Tapping screws(Provided with the LZ-800W) should be used for mounting. (Attachment with velcro strips, although easy, can come off with a shock.) 2CAUTION Installation the TV Tuner Unit (Provided with the LZ-800W) (Provided with the LZ-800W) (Accessory D) Arracher les bandes de protection des bandes velcro, les attacher au bas de l’unite de dissimulation, et fixer a la moquette. Accessories External view ......... Number of items External view ......... Number of items A CAR ANTENNA ON OFF BOOST DIVERSITY WITH BOOSTER CX-A330 ........2 C ........6 D ........2 B ........1 Installation Installatio n Connecting the TV Tuner Unit See the LZ-800W instruction manual for details regarding the power harness and Video Input/Video Output terminals. Monitor Unit (LZ-800W) 2CAUTION FM transmitter antenna cord (Provided with the LZ-800W) (Provided with the LZ-800W) Extend the antenna cord and locate in an area where reception is not marred by excessive noise. FM-TX CAR DIVERSITY ANTENNAWITH BOOSTER CX-A330ONOFFBOOST CAR DIVERSITY ANTENNAWITH BOOSTER CX-A330ONOFFBOOST TV Tuner Unit (KTC-V800N/P) TV Antenna Unit (Accessory A) Connecting the Antenna Units Connecting the Antenna Units Incar antennas have a lower reception sensitivity than antennas intended for outside mounting. The picture may not appear or may be disturbed if the signal in your area is weak. To the TV tuner unit CAR DIVERSITY ANTENNAWITH BOOSTER CX-A330ONOFFBOOST – + Booster switch • Set this booster switch to "OFF" if there is ghosting of the on-screen image due to electromagnetic fields. •Please set the booster switch to the "ON" position in case of a weaken field area. OFF ON Ignition cable (Red) .12V Ignition key switchACC Ground cable (Black) · (To car chassis) Fuse(1A) Car fuse box (Main fuse) Battery Installation Installing the Antenna Units • Attach the antenna to the inner glass surface of the rear window using double-sided tape. Carefully check the installation location as the tape can only be stuck on once. • If the surface temperature of the glass of the rear window is low, warm it by turning on the power of the rear defogger. A cold window glass surface will weaken the adhesive strength of the double-sided tape. Also, if installation inside the cabin is performed on a day with high humidity or when it is raining, the high humidity level will weaken the adhesive strength of the double-sided tape. • Do not install the antenna in a location where it may obstruct the field of view during driving, such as on the windshield. 1 Check the location where the antenna is to be attached.Clean off any grease or dirt from the installation location using the supplied glass cleaner (Accessory B), clean the area with water and allow to dry. 2 CAUTION Clean the glass thoroughly as failure to clean the glass can not only weaken the adhesive strength of the double-sided tape, but may also cause it to come loose. 2 Remove the protective strips from the antenna parts and the back of the antenna unit. 3 Attach the double-sided tape of the antenna parts and the antenna unit to the rear windshield glass. Attach the double-sided tape by firmly pressing down from the top. Secure cables using the supplied clampers. 4 After attaching the antenna with the double- sided tape, allow it to sit undisturbed for 24 hours. Take care not to apply force to the antenna or allow it to get wet during this time. 5 Wire the antenna cable to TV tuner unit. Antenna parts Antenna unit Bundle cables with the Rear window Rear seat ...