1 Wall Mount and Table Top 1500VG Touch Panels NXD-1500VGNXT-1500VG(Wall Mount) (Table Top) Verify you are using the latest NetLinx Master and Modero touch panel firmware (available from Verify the TPDesign4 program being used is Version 2.6 or higher. Overview The VG-Series of touch panels can be fitted for either Video (Composite) or RGB (Component) via the use of two kit configurations: Video Kit and RGB Kit. Each kit comes with its own group of standard components that are specific to its configuration. The following table outlines the different configurations available for 1500VG panels: Modero 1500VG Multimedia Touch Panels With Video Kit NXD-1500VG (FG2253-61V) 15" Modero Multimedia WallMount Panel with Video Kit. NXT-1500VG (FG2252-61V) 15" Modero Multimedia Table Top Panel with Video Kit. With RGB Kit NXD-1500VG (FG2253-61RGB) 15" Modero Multimedia WallMount Panel with RGB Kit. NXT-1500VG (FG2252-61RGB) 15" Modero Multimedia Table Top Panel with RGB Kit. Specifications 1500VG Specifications Dimensions (HWD): •NXD-1500VG (with faceplate): 14.37" x 15.20" x 3.31" (36.50 cm x 38.61 cm x 8.40 cm) •NXT-1500VG (Fully raised): 12.94" x 14.95" x 11.73" (32.87 cm x 37.97 cm x 29.78 cm) •NXT-1500VG (Fully lowered): 7.45" x 14.95" x 11.72" (18.92 cm x 37.97 cm x 29.77 cm) •CB-TP15 (conduit/wallbox): 13.48" x 14.18" x 3.49" (34.24 cm x 36.00 cm x 8.85 cm) •MB-TP15 (VESA mounting box): 14.37" x 15.19" x 3.59" (36.50 cm x 38.59 cm x 9.12 cm) Power: •Constant current draw: 3.7 A @ 12 VDC (stand-alone) •Startup current draw: 5.5 A @ 12 VDC (stand-alone) Minimum power supply required: •PSN6.5 Power Supply (FG423-41) - using accessories can increase the power draw requirements Memory: •256 MB on-board memory •128 MB Compact Flash (upgradeable to 1 GB factory programmed) Weight: •NXD-1500VG: 13.45 lbs (6.10 kg) •NXT-1500VG: 17.15 lbs (7.78 kg) LCD Parameters: •Aspect Ratio: 4:3 •Brightness (luminance): 400 cd/m2 •Channel transparency: 8-bit Alpha channel transparency •Contrast ratio: 300:1 •Display area (HW): 304.13 mm x 228.10 mm •Display colors: 16 million colors (24-bit color depth) •Dot/pixel pitch: 0.297 mm •Screen resolution (HW): 1024 x 768 •Video formats: NTSC, PAL, and SECAM (shown within variable-size video windows) Viewing Angles: •Vertical: + 85° (up from center) and - 85° (down from center) Supported Audio Sample Rates: •48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz, 11025Hz, and 8000Hz. Certifications: •FCC Part 15 Class B, CE, and EN 60950 1500VG Specifications (Cont.) Supported Transport Protocols: •RTP (MPEG-2/MPEG-4 Transport Stream) •UDP (MPEG-2 Transport Stream) Supported Audio Codecs: •Advanced Audio Coding (AAC) •MPEG Audio Level 2 (MP2) •MPEG Audio Level 3 (MP3) Supported Video Codecs: •MPEG-2 •MPEG-4 Front Panel Components: •Light Sensor: Photosensitive light detector for automatic adjustment of the panel brightness •Motion Sensor (PIR): Proximity Infrared Detector to wake the panel when panel is approached •Front Setup Access Button: Pushbutton (grey) used to either put the panel into a "sleep" or "wake" state •Microphone: Used for intercom applications •Speakers: Stereo output with a frequency response of 450 Hz - 7 KHz Rear Panel Components: •RGB Connector: Made available only by using an NXA-RGB interface card installed within the touch panel. Used with Component/RGB signals •Audio/Video Connector: RJ-45 connector for communication of differential audio/video signals •Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication •PWR Connector: 2-pin 3.5 mm mini-Phoenix connector •Stereo Output Connector: Stereo output through a 3.5mm mini-jack •USB Connector: Two Type A USB ports •Mini-USB Connector: 5-pin Mini-USB connector Operating / Storage Environments: •Operating Temperature: 10° C (50° F) to 40° C (104° F) •Operating Humidity: 20% to 85% RH •Storage Temperature: -20° C (-4° F) to 60° C (140° F) •Storage Humidity: 5% to 85% RH Included Accessories: •Installation Kit for 15" NXD panels (KA2251-02): - 2-pin mini-Phoenix connector (41-5025) - Four Drywall clips (62-5924-05) and #6 -metal strips (80-0192) - Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08) - Two CAT5 Suppression Ferrites (04-0014) •Installation Kit for 15" and 17" NXT panels (KA2251-04): - 2-pin mini-Phoenix connector (41-5025) - One CAT5 Suppression Ferrites (04-0014) - Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08) •Included within the RGB Kit (FGxxxx-xxRGB) is the following: - Modero VG Touch Panel (NXD/NXT-1200/1500/1700VG) - NXA-AVB/RGB Breakout Box (FG2254-11) - NXA-RGB internal RGB/VGA Interface Card (FG2260) - NXA-RGBCBL, 15-pin to 5X BNC RGB Breakout cable (FG2250-80) - NXA-MTC/RGB Modero 10’ foot Table Top Cable (with RGB connector) (CA2250-70) •Included within the Video Kit (FGxxxx-xV) is the following: - Modero VG Touch Panel (NXD/NXT-1200/1500/1700VG) - Modero 10’ foot Table Top Cable (CA2250-50) - NXA-AVB/ETHERNET Breakout Box (FG2254-10) Other AMX ...