Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
1 Sample Wall Mount and Table Top CV Touch Panels ATTENTION! Verify you are using the latest NetLinx Master Firmware (available from on your ME260/64 and NI-Series Controllers. Verify the TPDesign4 program being used is Version 2.4 or higher. Overview The 12" (NXT/NXD-CV12) and 15" (NXT/NXD-CV15) Video panels are 4th generation graphics touch panels that provide richer colors and crisper contrast than any panels currently on the market. Modero tilt panels now come with an optional NXA-BASE/B battery base that allows it to function off the collective charge of two internal NXT-BP batteries that can be charged either in the base or in an optional NXT-CHG charger. Specifications Modero CV Specifications Dimensions (HWD): NXT-CV15 • 12.94" x 14.95" x 11.73" (32.87 cm x 37.97 cm x 29.78 cm) (FG2252-11) Fully lowered height: 7.45" (18.92 cm) NXD-CV15 • Decor faceplate included: 14.37" x 15.20" x 3.31" (FG2253-12) (36.50 cm x 38.61 cm x 8.40 cm) CB-TP15 • Conduit/wallbox: 13.48" x 14.18" x 3.49" (FG032-10) (34.24 cm x 36.00 cm x 8.85 cm) (optional) Dimensions (HWD): NXT-CV12 • 10.91" x 12.34" x 12.50" (27.70 cm x 31.33 cm x 31.75 cm) (FG2250-11) Fully lowered height: 6.77" (17.20 cm) NXD-CV12 • Decor faceplate included: 12.38" x 12.59" x 3.25" (FG2251-12) (31.43 cm x 31.97 cm x 8.25 cm) CB-TP12 • Conduit/wallbox: 11.52" x 11.60" x 3.50" (FG031-10) (29.27 cm x 29.47 cm x 8.89 cm) (optional) Power Requirements (CV12): • Constant current draw: 2.04 A @ 12 VDC (stand-alone) • Startup current draw: 3.0 A @ 12 VDC (stand-alone) Power Requirements (CV15): • Constant current draw: 3.45 A @ 12 VDC (stand-alone) • Startup current draw: 5.1 A @ 12 VDC (stand-alone) Minimum power • CV12: requires a PSN4.4 Power Supply (FG423-45) supply required: -using accessories can increase the power draw requirements • CV15: requires a PSN6.5 Power Supply (FG423-41) -using accessories can increase the power draw requirements Memory: • 64 MB SDRAM (upgradable to 256 MB) • 64 MB Compact Flash (upgradable to 1 GB factory programmed) Resolutions: • 12" panels: 800 x 600 pixels • 15" panels: 1024 x 768 pixels Front Panel: • Light Sensor: Photosensitive light detector for automatic adjustment of the panel brightness • Motion Sensor (PIR): Proximity Infrared Detector to wake the panel when panel is approached • Sleep Button: Pushbutton (grey) used to either put the panel into a "sleep" or "wake" state • Microphone: Used for intercom applications • Speakers: Frequency response 450 Hz - 7 KHz Rear Connectors: • PCMCIA Card Slot: Provides wireless connectivity (with upgrade) • Stereo Ouput Connector: Stereo output through a 3.5mm mini-jack (for use with external speakers or headphones) • Audio/Video Connector: RJ-45 connection for A/V signals between the NXA-AVB Breakout Box and the panel • Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication • ICSNet Connector: RJ-45 connection for ICSNet interface Modero CV Specifications (Cont.) Operating /Storage• Operating Temperature: 10° C (50° F) to 40° C (104° F) Environments: • Operating Humidity: 20% - 85% RH • Storage Temperature: -20° C (-4° F) to 60° C (140° F) • Storage Humidity: 5% - 85% RH NXA-AVB: A/V Breakout Box: FG2254-01 (FIG. 2) • Included accessory with CV12 and CV15 panels • Provides video/audio distribution to the A/V panel over CAT5 cable (up to 200’/60.96 m) and accepts either Composite or S-Video Supported Audio Sample Rates: • 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz,11025Hz, and 8000Hz. Included • Installation Kit for 12"/15" panels (KA2250-02): Accessories: -One 2-pin mini-Phoenix connector (41-5025) and - Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08) • Modero Table Top Cable (CA2250-50) provided with all NXT panels. Optional• CB-TP12 Conduit/Wallbox (FG031-10) Accessories: • CB-TP15 Conduit/Wallbox (FG032-10) • MB-TP12 Universal VESA Mounting Box (FG031-50): - One strain relief grommet (45-0004-03) - One black metallic VESA back box (62-0031-50) - One black plastic cover (with grommet opening) (60-0031-50) - Four Phillips pan-head screws (#8-32 x 0.50 Black) (80-0146-02) - Twelve Phillips-head screws (#6-32 x 0.500 Black) (80-0139) • MB-TP15 Universal VESA Mounting Box (FG032-50): - One strain relief grommet (45-0004-03) - One black metallic VESA back box (62-0032-50) - One black plastic cover (with grommet opening) (60-0032-50) - Four Phillips pan-head screws (#8-32 x 0.50 Black) (80-0146-02) - Twelve Phillips-head screws (#6-32 x 0.500 Black) (80-0139) • NXA-BASE/B Battery Base Kit (FG2255K) 1 battery base (FG2255) and 2 NXT-BP batteries (FG2255-10) • NXA-RK12 Rackmount kit for 12" Wall Mount panels (FG2904-50) • NXA-RK15 Rackmount kit for 15" Wall Mount panels (FG2904-51) • NXA-WC80211b, 802.11B Wireless Card (FG2255-02) • NXT-CHG Kit (FG2250-50K): 1 charger (FG2250-50) and 2 NXT-BP batteries (FG2255-10) • PSN4.4 Power Supply (12 VDC) (FG423-45) • PSN6.5 Power Supply (12 VDC) (FG423-41) • Upgrade SDRAM memory: NXA-EXM128...