Assessments - 2, GPA: 4.5 ( )

Fabricante : Whistler Arquivo Tamanho: 572.31 kb Arquivo Nome : b2dea7e9-19ec-4f7d-9207-bbdc0600500b.pdf Língua de Ensino:

11 - 12 • Wire Cable Gauges Operation .......................................................................... 13 - 20 • Making the Connection • The Power Source • TV Fans and Audiophiles • Microwaves • Powerful Advice • Technical Types Technical Operating Principles........................................ 21 - 22 Operation Summary ......................................................... 22 - 23 Troubleshooting ................................................................ 24 - 25 Specifications .................................................................... 26 - 27 Warranty Information........................................................ 28 - 30 2 pro1200to3000w.4/30/2010 8:54 AM Page 7 FEATURES FEATURES 1. Three 110 AC Outlets 2. Remote Operation Jack The inverter is designed to be operated a remote location via a WHISTLER Remote Switch (P/N Pro-RS01) which plugs into this socket. This optional accessory is available through WHISTLER or your WHISTLER dealer. 3. USB Power Port This port is always on and independent of the inverter’s on/off switch. 4. On/Off Switch Turns the unit On/Off. 5. Digital Power Meter 6. On/Shutdown Indicator Light The LED will illuminate GREEN when the inverter is powered in normal conditions. This light will turn RED and the inverter will automatically shut down (except low voltage alarm) when any of the following problems occur: • Short Circuit Protection. The inverter will shut down until the short is removed. • Low Voltage Alarm. An alarm will sound when the voltage from the battery discharges to 10.5+/-0.5 volts DC. This is an indication that the battery needs to be recharged. • Over Voltage Protection. The inverter will turn itself off when the input exceeds 15.5+/-0.5 volts DC. • Under Voltage Protection. The inverter will turn itself off when the input is less than 10.0+/-0.5 volts DC. 4 • Overload Protection. The inverter will turn itself off when the continuous draw or draw of the equipment being operated exceeds power rating for the inverter. • Thermal Protection. The inverter will turn itself off when the internal temperature exceeds safe design parameters. 7. Cooling Fans 8. Power Input Terminals (Observe proper polarity) Note: In the event of an automatic shut down or continuous audible alarm, turn the inverter OFF (O) until the source of the related problem has been determined and resolved. 5 INVERTER INFORMATION IMPORTANT INFORMATION pro1200to3000w.4/30/2010 8:54 AM Page 9 Important Information About Your New Whistler Inverter. This manual will provide you with directions for the safe and efficient operation of your Whistle Power Inverter. Read the manual carefully before using your new Whistler inverter and keep the manual on file for future reference. Important Note: Each of the following operating procedures and safety features must be carefully reviewed and thoroughly understood prior to using the inverter. Failure to do so may result in damage to the inverter, equipment or serious personal injury. Notes: Your Whistler inverter is designed to operate from a 12 volt power source only. Never attempt to connect your Whistler inverter to any other power source, including any AC power source. • 110 volts can be lethal. Improper use of your Whistler inverter may result in property damage, personal injury or loss of life. • Do not connect the inverter’s output to any other power source. • Not recommended for use with medical equipment. Check with the appliance manufacturer for compatibility with modified sine wave inverters. Some appliances may not work well, not at all or be damaged. This is especially true for medical equipment. For more information on compatibility issues, please visit our inverter FAQ page at: whistlergroup.com 6 Getting Started Power equipment and appliances or tubes require an initial surge of power to get them up and running. This power surge is referred to as the "starting load" or "peak load." (By comparison, as standard light bulbs do not require a large starting load.) Once the equipment or appliance has up, it settles down to a slower pace and requires far less electrical power to operate. This lower power requirement is referred to as the "continuous load." In order to ensure that the capacity of your Whistler inverter is sufficient to meet the required start up load, you must first determine the power consumption of the equipment or appliance you plan to operate. Power consumption is rated either in wattage or amperes, and information regarding the required "watts" or "amps" generally is stamped or printed on most appliances and equipment. If this information is not indicated on the appliance or equipment, check the owner’s manual. Contact the appliance or equipment manufacturer to determine if the device you are using (TV’s, battery charger, computer, etc.) is compatible with a modified sine wave. If the power consumption is rated in amps, multiply the number of amps by 110 (AC voltage) to determine the comparable watt...

Baixe o seu

Para fazer o download, introduza 2 dígitos :