Assessments - 5, GPA: 3.4
(
)
)
|
Facilidade de uso
To turn on the base’s ringer, set RINGER to ON. SETTING THE HANDSET’S RINGER VOLUME At any time except during a call, press t or s to set the handset’s ringer volume. The phone rings at the selected volume and the display shows Ringer Low or Ringer High. SETTING THE NUMBER OF RINGS Set RING TIME on the side of the base to 3, 5, or T/S to select how long the TAD waits to answer a call (3 rings, 5 rings, or toll-saver). Note: If you plan to check messages by long distance, set RING TIME to toll-saver (see “Using Toll-Saver” on Page 32). SETTING THE DAY/TIME You must set the day of the week and time so the TAD can record the correct day and time of each message. Note: If you wait more than 15 seconds between each key press, the TAD exits the time setting process. Start again at Step 1. 1. Hold down CLOCK until the TAD beeps. The TAD announces the currently set day and displays the day’s number (0 for Sunday, 1 for Monday, and so on). 43-797.fm Page 14 Monday, August 16, 1999 9:20 AM 43-797.fm Page 15 Monday, August 16, 1999 9:20 AM 2. To change the day of the week, repeatedly press SKIP to move forward or REPEAT to move backward. 3. Press CLOCK. The TAD announces the hour. To change the hour, repeatedly press SKIP or REPEAT. 4. Press CLOCK. The TAD announces the minutes. To change the minutes, repeatedly press SKIP or REPEAT. 5. Press CLOCK. The TAD announces “AM” or “PM,” and A or P appears. Press SKIP or REPEAT to change this setting. 6. Press CLOCK. The TAD announces the day and time. SETTING AUTOTALK Your phone is preset so you must press TALK when you lift the handset from the base to answer a call. With auto talk turned on, you can answer a call by just lifting the handset from the base or by pressing any key when the handset is away from the base. Follow these steps to turn auto talk on or off. 1. Lift the handset and press FUNCTION. A menu appears with Auto Talk selected. 2. Press SELECT to change the auto talk setting. Onor Off appears indi- cating the selected setting. 3. To clear the display, press FUNCTION or return the handset to the base. TURNING CALLER ID/ CALL WAITING ON/OFF If you have Call Waiting with Caller ID service, you can set the TAD-797 to show Caller ID information for an incoming call even if you are already on the phone. Follow these steps to turn the Caller ID/ Call Waiting feature on or off. 1. Lift the handset and press FUNCTION. 15 43-797.fm Page 16 Monday, August 16, 1999 9:20 AM 2. Press 2 or t to select CIDCW (Caller ID/Call Waiting). 3. Press SELECT to change the Caller ID/Call Waiting setting. On or Off appears indicating the selected setting. 4. Return the handset to the base to store the new setting. STORING YOUR AREA CODE To quickly dial a number from a Caller ID record (see “Dialing Numbers from a Caller ID Record” on Page 26) or to correctly store a number from a record into a memory dialing location (see “Storing a Caller ID Record to Memory” on Page 27), you must store your local area code in the TAD-797’s memory. Then, when you dial from a Caller ID record, the TAD-797 skips the area code if it matches the one you stored. Follow these steps to store your area code. 1. Lift the handset and press FUNCTION. 2. Press 3 (or t twice) to select Area Code. 3. Press SELECT, then enter your 3digit area code. If you make a mistake, repeatedly press or to move the cursor over the incorrect digit, then enter the correct number. area code to overwrite the old one. 4. Press SELECT to store the area code. 5. To clear the display when you finish, press FUNCTION or return the hand- set to the base. Note: If an area code is already stored, it appears on the display. To delete the area code, press DELETE three times. Or, simply enter a new 16 43-797.fm Page 17 Monday, August 16, 1999 9:20 AM TELEPHONE OPERATION MAKING AND RECEIVING CALLS WITH THE HANDSET To make a call, lift the handset, then press TALK. The IN USE indicator on the base lights. Dial the number. You see the number as you dial, then (about 5 seconds later) the call’s elapsed time. Note: You can also dial the number before you press TALK. If you make a mistake, repeatedly press or until the cursor is over the incorrect digit, then enter the correct number. To answer a call, lift the handset from the base and press TALK. If auto talk is on, just lift the handset from the base, or, if the handset is away from the base, press any key to answer a call. To end a call, place the handset on the base or press TALK. ADJUSTING THE HANDSET VOLUME To adjust the volume of the sound you hear through the handset, during a call, press t for normal volume or s for high volume. The display shows Volume Normal or Volume High. When you hang up, the volume returns to the normal setting. ANSWERING CALLS WITH THE SPEAKERPHONE To answer a call using the speakerphone, press SPEAKER. The SPEAKER indicator lights. 17 43-797.fm Page 18 Monday, August 16, 1999 9:20 AM To adjust the speakerphone’s volume, repeatedly press VOLUME s or t on the base. T...