Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
To pair and connect a cellular phone: 1. Using the telephone base, ..........press the MENU softkey while in idle mode. 2. ..........Press the UP and DOWN Navkeys.............. to highlight Bluetooth, then press the SELECT softkey to enter the Bluetooth menu. 3. Press the SELECT softkey to enter the Set up Cellular menu. • If a device is already connected to the telephone base, press the OK softkey to temporarily disconnect the device(s) and continue the pairing process. 4. Press the NEXT softkey to set the telephone base in discoverable mode. 5. Using your cellular phone, turn on the Bluetooth feature on your cellular phone, and search for or add new devices. 6. Once your cellular phone has found the AT&T EP5632 telephone base, select it. 7. Using your cellular phone, enter the PIN of the telephone base (the default PIN is 0000) to continue the pairing process. 8. Using the telephone base, press the YES softkey to connect to your cellular phone when the pairing process is complete. • If successful, Cellular setup completed will appear on the telephone base display. • If you already have two devices on the Active Devices list, press the YES softkey to connect to your paired cellular phone. You will then be prompted to replace an existing device on the Active Devices list (page 27). When a device is connected, ....the 1 and/or 2 status icons will appear on the display. NOTE: If you a device connected to the telephone base when pairing, Connected deviceswill be temporarily disconnected will appear on the display. 12:00 AM REDIAL CID MENU Main Menu Call Log Answering System Bluetooth Select Bluetooth Set up Cellular Set up Headset Active Devices Select Set up Cellular Set your Cellular to search for devices, then press NEXT Next Set up Cellular AT&T EP5632 in Discoverable Mode PIN = 0000 STOP HELP Set up Cellular Pairing complete Connect to Cellular? YES No Cellular setup completed Set up Headset Before you begin, make sure that your Bluetooth enabled headset is not connected to any other Bluetooth device................................. Refer to your headset's user's manual to determine the headset's PIN and how to set your headset in discoverable mode. To pair and connect a headset: 1. Using the telephone base, ..........press the MENU softkey while in idle mode. 2. ..........Press the UP and DOWN Navkeys.............. to highlight Bluetooth, then press the SELECT softkey to enter the Bluetooth menu. 3. Press the UP and DOWN Navkeys to highlight Set up Headset, then press the SELECT softkey. • If a device is already connected to the telephone base, press the OK softkey to temporarily disconnect the device(s) and continue the pairing process. 4. Using your headset, set your headset in discoverable mode. 5. Using the telephone base, press the NEXT softkey on the telephone base to search for your headset. 6. Once the telephone base finds your headset, select it and press the PAIR softkey. If telephone base cannot find your headset, press the FIND softkey to search again, and make sure that your headset is in discoverable mode. 7. Enter the PIN of your headset, then press the DONE softkey (for most headsets, the PIN is 0000). 8. When the pairing is complete, press the YES softkey to connect to your headset. • If successful, Headset setup completed will appear on the telephone base display. • If you have already one headset device on the Active Devices list, press the YES softkey to connect to your paired headset. You will then be prompted to replace the existing headset on the Active Devices list (page 27). When a device is connected, ....the 1 and/or 2 status icons will appear on the display. NOTE: If you have a device connected to the telephone base when pairing, Connected devices will be temporarily disconnected will appear on the display. 12:00 AM REDIAL CID MENU Main Menu Call Log Answering System Bluetooth Select Bluetooth Set up Cellular Set up Headset Active Devices Select Set up Headset Set your Headset in Discoverable mode, then press NEXT Next Headsets Found Mary's Headset FIND INFO PAIR Set up Headset Enter PIN: 0000 done Erase help Headset setup completed Managing your devices Once you have paired a Bluetooth device, you can rename, delete, and view the device's information in the Paired Devices list. Once a Bluetooth device is connected to the telephone base, you can replace, remove or disconnect the device from the Active Devices list (page 27), and view the device's status information (page 27). Paired Devices All paired devices are stored on the Paired Devices list. Up to eight devices (any combination of cell phones and headsets) can be paired with the telephone base. If a device is successfully paired, the icon (for cell phone) or (for headset) and the name of the device will be shown on the Paired Devices list. Rename a paired device 1. Press the MENU softkey on the telephone base while in idle mode. 2. Press the UP and DOWN NavKeys to highlight Bluetooth, then press the SELECT softkey to ent...