Assessments - 5, GPA: 4
(
)
)
|
Facilidade de uso
When the answerer has recorded multiple messages, the Problem Explanation/Solution • Any defect in materials or workmanship. Battery compartment door In the event of a power loss, the 9-volt battery day. messages light flashes once for each message, pauses, and then repeats. For how long after your purchase: Doesn’t answer, or • Make sure answerer is turned on. (not included) enables the answerer to retain • To play messages: press and release PLAY/STOP. • One year. • To set the hour: press and hold HOUR until the answerer announces the messages stored in memory. To install the answers on 10th ring • Memory is full, erase some messages. (The warranty period for rental units begins with the first rental or 45 days from date of correct hour. • To stop playback: press and release PLAY/STOP again. battery: shipment to the rental firm, whichever comes first.) • Check AC power and phone line connections. • To set the minute: press MINUTE until the answerer announces the correct • To restart the message that is playing: press and release REVIEW. What we will do: 1. Remove the battery compartment cover on Incoming messages • Was an extension phone picked up? minute. (When you press and hold MINUTE, time advances in 5-minute • Provide you with a new or, at our option, a refurbished unit. the bottom of the unit by removing the • To go back to the beginning of a previous message: repeatedly press and increments; when you press and release MINUTE, time advances in 1-minute are incomplete • The caller left a message that is longer than the • The exchange unit is under warranty for the remainder of the original product’s warranty screw with a Phillips screwdriver. release REVIEW until you reach the message you want to hear. increments. message length you set on the back of the period. 2. Connect a fresh 9-volt alkaline battery and • To skip to the beginning of the next message: press and release SKIP. answerer. Try setting message length to MAX. How to make a warranty claim: To check the time/day setting, press and release the TIME/SET button (the answerer • Properly pack your unit. Include any cables, etc., which were originally provided with the place it inside the battery compartment. announces the day, hour, and minute). • To erase a message while it is playing: press and release the ERASE button. • Memory is full. product. We recommend using the original carton and packing materials. 3. Replace the battery compartment cover and Note: The default time remains "1:00 AM Monday" until the time is set. The answerer beeps to confirm the message has been erased. • You accidentally pressed PLAY/STOP when • Include in the package evidence of purchase date such as the bill of sale. Also print your replace phillips-head screw. name and address and a description of the defect. Send standard UPS or its equivalent to: you were playing the messages. ERASING ALL MESSAGES Thomson Consumer Electronics, Inc. Note: The BATTERY LOW indicator flashes when you need to change the battery or if you haven’t installed the battery. When you are replacing the 9-volt battery, disconnect the telephone cord before you install the battery. When the answerer isn’t playing or recording messages, press and hold ERASE Won’t respond to • Must use touch-tone phone. Product Exchange Center 32 Spur Drive We bring good things to life. SETTING THE SECURITY CODE until you hear a beep. You can retrieve messages erased this way by pressing remote commands • Must enter correct security code. El Paso, Texas 79906 PLAY/STOP— but only if the answerer hasn't recorded new messages after you To pick up your messages from another location (called remote access), you must • Did unit hang up? If you take no action for a • Pay any charges billed to you by the Exchange Center for service not covered by the erased the messages. enter a 3-digit security code. The default code is 123, but you can change it. period of time, it automatically hangs up. warranty. • Insure your shipment in case of loss or damage. Thomson accepts no liability in case of • To change the code: Press and hold the TIME/SET button while you press and MEMORY FULL Answerer doesn't work • Unplug power cord from the back of the unit damage or loss. hold the CODE button. Release TIME/SET and CODE buttons after you hear the • A new or refurbished unit will be shipped to you prepaid freight. When the memory is full, the messages light flashes rapidly and the unit answers and plug it back in to reset the answerer. code you want to use. What your warranty does notcover: after 10 rings. When calling your machine from another phone (called Remote Note: Only use the Thomson 5-2418 adapter that was packed with this unit. Using other adapters may damage the unit. 1 2 3 Can't hear messages • Adjust volume control on side of unit. • To check the code: Press and hold the TIME/SET button while you press and • Customer instruction. (Your Owner’s Manual provides information regarding operating INSTALLATION Access) enter th...
Este manual também é adequado para os modelos :Auto respondedores - 20801800 (156.93 kb)