Assessments - 4, GPA: 3.5 ( )

Fabricante : Lanzar Car Audio Arquivo Tamanho: 487.48 kb Arquivo Nome : HTG214-224-234-244-254-264-414-424-434.pdf Língua de Ensino:

You have purchased a quality product designed and engineered to give you many years of uncompromised musical service. Heritage amplifiers are designed with the latest technology available, incorporating a DC to DC Switching Power Supply, which provides headroom for even the most demanding peaks and dynamic ranges found on modern CD's and recordings. Features • MOSFET switches maintain rated power over a wide range of battery voltages • Stiffly regulated PWM- type power supplies • 2 Ohm Stable Stereo operation • Stereo, Bridge Mode and Tri-Mode System Application Compatible • Variable input level controls for each pair of channels • Variable high and low pass crossover controls • Thermal and speaker short protection circuitry • Power and Protection LED indicators • Bass Boost Circuitry • Nickel plated power, RCA and speaker connectors • High-efficiency, heavy aluminum heatsink • Bass Boost Remote control Features & Controls 2 Channel HTG 214/ 224/ 234/ 244/ 254/ 264 2 Features & Controls 4 Channel HTG 414/424/434 3 Features & Controls Features & Controls 1. Line Out RCA Jacks - The LINE OUT allows you to build multiple amplifier systems without having to use splitter cords to distribute the signal. Now it is simple a matter of bringing one set of RCAs into the first amplifier, then using the line out RCA jacks as the feed to the next amplifier. 2. Line Input RCA Jacks - These inputs are for signal cables from the source. Always use high quality shielded RCAcables. 3. Input Level Controls- Enables the matching of input levels to the output levels from the head unit(or other signal source). 4.High Pass Filter- When Crossover Mode Selector is in High Pass Mode, this control limits the frequencies which will be distributed to the speakers to those above the value to this is set within the range 40Hz ~ 3kHz. 5.Crossover Mode Selector- Determines the mode of built-in crossover: low pass ( permits only low frequency signals to pass to speakers), high pass ( permits only high frequency signals to pass to speakers), or flat. 6.Low Pass Filter- When Crossover Mode Selector is in Low Pass Mode, this control limits the frequencies which will be distributed to the speakers to those below the value to which this is set within the range 40- 350Hz. 7.Bass Boost Switch and Variable-ON and OFF 8.Bass Boost Remote Control Input 9.Power & Protection Indicators- Provide instant information on status of amplifier, including short-circuit and thermal overload alerts. Specifications Specifications Model HTG214 2Channel amplifier HTG224 2Channel amplifier HTG234 2Channel amplifier HTG244 2Channel amplifier RMS at 4 Ohms 2 x 90W 2x150W 2 x 200W 2 x 250W MAX at 4 Ohms 2 K 180W 2 x 300W 2 x 400W 2 x 500W At 4 Ohms Bridged 1 x 360W 1 X600W 1 x 800W 1 x 1000W RMS at 2 Ohms 2x150W 2 X 250W 2 x 350W 2 X 420W Min.Speaker Impedance 2 Ohm 20hm 2 Ohm 2 Ohm T.H.D 0.04% 0.04% 0.04% 0.04% Frequency Response 10Hz~35kHz, -1dB 10Hz-35kHz, -1dB 10H...

Baixe o seu

Para fazer o download, introduza 2 dígitos :