Log:
Assessments - 5, GPA: 4 ( )

Instruções de Operação MTX Audio, Modelo TA4501

Fabricante : MTX Audio
Arquivo Tamanho: 62.39 kb
Arquivo Nome : 98e964c6-f85f-42d6-b30f-8e473e88dc6f.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Adding MTX amplifiers and matching MTX speakers and subwoofers with StreetWires connections will put you in a better position to hear, feel, and experience all of the music the artist intended. Specifications Primary Ratings: Power Output: 250 watts RMS x 1-channel at 4 ohm and . 1% THD+N Signal-to-Noise Ratio (1 watt): 71dB Secondary Ratings Power Output: 500 watts RMS x 1-channel at 2 ohm and . 1% THD+N THD+Noise (Distortion) (1 watt): . .5% Frequency Response (-3dB): 20Hz-200Hz Maximum Input Signal: 10V Maximum Sensitivity: 100mV Dimensions: 9-5/8” x 16-11/16” x 2-1/2” (245mm x 425mm x 65mm) Smart Engage™ Auto-Turn-On (Patent No: US06556683) Patented Adaptive Class D Technology (Patent No: US06753729) Patented Power Supply (US05598325) Input Sensitivity Switch: 100mV-1V/1V-10V Crossover: Low @ 40Hz-200Hz, 24dB ThunderEQ Boost: 0-18dB, Freq. 40Hz Remote Subwoofer Level Control Features 1. Prizm EFX – All MTX amplifiers include backlit adjustment controls on the top surface of the product. • Color – The backlit controls offer unlimited colors on the display -- from RED, GREEN, and BLUE to any color in between. • EFX – You can switch Prizm EFX lighting to “pulsate” with the beat of the music. 2. Xtant Technology Cooling (XTC) – A thermal-regulated turbo-charged intercooler supplies fan forced cool air evenly and constantly through tightly packed bonded fins. Fan speed is continuously varying and controlled by the amplifier’s output, temperature of heatsink, and transformers. Exhaust from the internal heatsink is strategically positioned to cool the transformers to maintain maximum performance at all volumes. 3. Bi-Level Inputs with Smart Engage™ – All MTX amplifiers feature RCA type input connections. • Low Level Input – Source units with an output signal level of 100mV–10V may be used. See “Input Sensitivity” for proper voltage level setting. • High Level Inputs with Smart Engage™ – All MTX amplifiers allow high level inputs through RCA type input connections using provided high level adapters. Source units with an output signal level of 100mV–10V may be used. See “Input Sensitivity” for proper voltage level setting. • Smart-Engage™ Auto-Turn-On – An auto-turn-on circuit is included within the amplifier. A remote turn- on wire is not necessary when connecting the amplifier’s high-level input to a high-powered source unit (car stereo). The amplifier will automatically turn on when music is received through this type of connection. 4. Input Sensitivity – The Input Sensitivity switch is used to set the proper input voltage range: X1 POSITION: 100mV–1V (Typically for RCA Input) X10 POSITION: 1V–10V (Typically for Speaker Level Input) 5. Gain Control – This feature is used to fine-tune the input sensitivity of the amplifier to the source unit’s output level. 6. Low-Pass 40Hz-200Hz Variable X-over with 24dB per octave Slope – This control allows the user to choose the exact low-pass frequency range the amplifier will play for the best possible performance. The upper end of the crossover frequency point can be selected from 40Hz–200Hz at 24dB per octave. 7. ThunderEQ (Variable) – This feature will add up to 18dB of low frequency impact to the audio system. The Bass Boost is centered at 40Hz. 8. Remote Subwoofer Level Control (Remote Gain) – This port allows the use of the optional “remote level control”. The Remote Subwoofer Control is a bass control module that can be installed in any location within the vehicle for remote adjustments. 9. StreetWires Connectors – All MTX amplifiers include StreetWires connectors for efficient current and maximum voltage transfer. 10. Speaker Connection – Two sets of speaker terminals are provided for dual woofer applications. When connecting a single woofer, use only one set of speaker terminals. 11. Power Terminals – This is the main power connection for the amplifier. The power and ground wire size should be the same gauge. • GND – The ground wire from this connection must be attached to bare metal on the vehicle. The distance to the ground should be as short as possible and no more than 18”. • REM – To turn the amplifier on/off, this terminal must be connected to the source unit’s “remote or electric antenna” wire. • +12V – The power wire from this connection must be attached to the positive side of the vehicle battery. • CAP+ - Capacitor Positive Input – The ideal connection point for the positive side of the capacitor to increase the amplifier’s performance. CAP- - Capacitor Negative Input – The ideal connection point for the negative side of the capacitor to increase the amplifier’s performance.• Before Starting MTX recommends that you have your new Thunder amplifiers installed by an authorized MTX retailer, preferably MECP certified. If you do decide to do it yourself, make sure you have read the instructions carefully and have the following tools: • Electric drill • Phillips bit or screwdriver • 1/8” bit • Wire cutters/crimpers • Safety glasses • X-Acto knife Disconnect ...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias