|
Instruções de Operação Kenwood, Modelo KAC-X501F
Fabricante : Kenwood Arquivo Tamanho: 1.04 mb Arquivo Nome : kacx501f.pdf
Língua de Ensino:
|
|
|
|
Ir para baixar
Facilidade de uso
Refer to the model and serial numbers whenever you cat! upon your KENWOOD dealer for information or service on the product. Model KAC-X501F Serial number_ © PRINTED IN USA B64-1443-00 (KM) Safety precautions AWARNING | To prevent injury or fire, take the following precautions: • When extending the ignition, battery, or ground wires, make sure to use automotive-grade wires or other wires with a 10 mm2 (AWG8) 15 mm2 (AWG10) x 2] or more to prevent wire deterioration and damage to the wire coating. •To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. • Do not touch the unit during use because the surface of the unit becomes hot and may cause burns if touched. ACAUTION To prevent damage to the machine, take the following precautions: • Be sure the unit is connected to a 12V DC power supply with a negative ground connection. • Do not open the top or bottom covers of the unit. • Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. • When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. • To prevent a short circuit when replacing a fuse, first disconnect the wiring harness. NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, consult your Kenwood dealer. Cleaning the unit If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth. ACAUTION~ Do not wipe the panel with a hard cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off. FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modification's are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. Accessories Part name External View Number of Items Terminal cover (Power terminal) 1 Self-tapping screws (05 x 18 mm) 0Q33E> 4 Installation procedure Since there are large variety of settings and connections possible according to applications, read the instruction manual well to select the proper setting and connection. 1. Remove the ignition key and disconnect the negative © terminal of the battery to prevent short circuits. 2. Set the unit according to the intended usage. 3. Connect the input and output cables of the units. 4. Connect the speaker wires. 5. Connect the power wire, power control wire and grounding wire following this order. 6. Install the unit in the car. 7. Connect the negative © terminal of the battery. ? Ennlich ACAUTION • Be sure to turn the power off before changing the setting of any switch. • If the fuse blows, check wires for shorts, then replace the fuse with one of the samô rating. • Check that no unconnected cables or connectors are touching the car body. Do not remove caps from unconnected cables or connectors to prevent short circuits. • Connect the speaker wires t^ appropriate speaker connectors separately. Sharing the negative wire of the speaker or grounding speaker wires to the metal body of the car can cause this unit to fail. • After installation, check that the brake lamps, winkers, and wipers work properly. Installation Self-tapping screw Exhaust outlet (05 x 18 i» hi i) ••••**** * * * Installation board, etc. a (thickness : 15 mm or more) • Since the power amplifier has no parts which require operation, it can be installed at a position away from the driver's seat without any hindrances. As generally accepted positions for its installation, places such as inside the trunk, etc. can be considered. • Use the extension cables. (Optional.)_ Type ~~ ’ ---—Length 0.5m 1m 2m 4m 5m 6m RCA cable CA-2SL CA-12SL CA-22SL CA-52SL RCA cable (07mm) CA-3WL CA-13WL CA-23WL CA-53WL RCA cable (012mm) CA-5W CA-15W CA-25W CA-45W CA-65W ACAUTION • Do not install the unit under the carpet. Otherwise heat build-up occurs and the unit may be damaged. • Install this unit in a location which allows heat to easily dissipate. Once installed, do not place any object on top of the unit. • The surface temperature of the amplifier will become hot during use. Install the amplifier in a place where people, resins, and other substances that are sensitive to heat will not come into contact with it. • This unit has cooling fans to decrease the internal temperature. Be careful not to block the cooling fan openings when installing the unit. Blocking these openings will inhib...
Escreva a sua própria avaliação do dispositivo
|
|