Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
. . . . . . . . . . . . . .Pages 2-5 ©2007 MODEL 2115 Installation/Fonctionnement/Pieces Pour plus de renseignements concernant l’utilisation, l’installation ou l’entretien, Composer le 1 (800) 468-7867 Francais . . . . . . . . . . . . .Pages 6-9 Instalacion/Operacion/Piezas Para mayor informacion sobre el funcionamiento, instalacion o mantenimiento de la bomba: Llame al 1-800-468-7867 Espanol . . . . . . . . . . .Paginas 10-13 SIM822 (Rev. 12/10/07) Safety / Installation GENERAL SAFETY IMPORTANT SAFETY INSTRUCTIONS When installing and using this electrical equipment, basic safety precautions should always be followed, including the following: READ AND FOLLOW ALL INSTRUCTIONS To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. Risk of Electric Shock. Connect only to a properly-grounded, grounding type receptacle. The pump requires 115 volt, single phase current. The pump is protected by a ground-fault circuit interrupter (GFCI) built into the plug. Do not modify the cord, plug, or GFCI. Do not bury cord. Locate cord to minimize abuse from lawn mowers, hedge trimmers, and other equipment. To reduce the risk of electric shock, replace damaged cord immediately. To reduce the risk of electric shock, do not use an extension cord to connect the unit to the electrical supply; provide a properly located outlet. SAVE THESE INSTRUCTIONS The pump motor is equipped with an automatically resetting thermal protector and may restart unexpectedly. DO NOT plug in the pump while standing in water or on a wet or damp surface. DO NOT use in water where fish are present (oil in motor can kill fish). DO NOT pick up the pump by the power cord. Protect the electrical cord from sharp objects, hot surfaces, oil, and chemicals. Avoid kinking the cord. Unplug the pump before servicing it or attempting to clean it. Secure the discharge hose before starting the pump. An unsecured discharge hose may whip, which can cause personal injury and property damage. Keep the pump, base, and inlet screen free of debris and foreign objects. SPECIFICATIONS Power supply required..........................................115V, 60 HZ. Liquid Temp. Range........................................Max. 77°F (25°C) Operation Position.........................................................Vertical Individual Branch Circuit Required ..............................15 Amp Operating Depth Beginning min...............................3/4" (water level) Ending max...................................1/4" Discharge .........................................................1" NPT (25 mm) DESCRIPTION The submersible pump is designed for water removal from pool covers in home swimming pool applications. Unit is constructed of hi-impact corrosion resistant plastic. Screened inlet and base prevent large solids from entering pump and protect pool cover. NOTICE: This unit is not designed for applications involving salt water or brine! Use with salt water or brine will void warranty. PERFORMANCE GPH (LPH) AT TOTAL FEET (M) 3' 5' 10' 15' 18' 20' (0.91) (1.52) (3.05) (4.57) (5.49) (6.09) 22' (6.70) 1600 gal 1524 gal 1260 gal 924 gal 648 gal 372 gal (6 057 L) (5 769 L) (4 770 L) (3 498 L) (2 453 L) (1 408 L) 0 gal (0 L) INSTALLATION Hazardous voltage. Can shock, burn or cause death. Do not use power cord to lift motor. Always use handle. 1. Pump should always stand upright on base when operating. Do not suspend pump by means of discharge hose or power cord. Keep pump inlet screen clear. 2. To install a garden hose, first install adapter provided with pump. NOTICE: To keep friction as low as possible, hose must be 5/8" or larger. Keep hose as short as possible. 3. If, in your application, backflow is a problem when the pump stops, prevent it by installing a 1” NPT check valve in the pump discharge. 4. Power Supply: Pump is designed for 115V., 60 HZ. operation and requires an individual branch circuit of 15 amperes or more capacity. It is supplied with a 3-wire cord set with grounding-type, GFCI protected plug for use in a 3-wire, grounded outlet. For safety, pump should always be electrically grounded to a suitable electrical ground such as a grounded water pipe or a properly grounded metallic raceway or ground wire system. Do not cut off the round grounding prong. Risk of sudden starts. Can result in an electrical shock or the pinching of hands or tools. The pump motor is equipped with automatic resetting thermal protector and may restart unexpectedly. Protector tripping is indication of motor overloading as a result of operating pump at high pressure, excessively high or low voltage, inadequate wiring, incorrect motor connections, or a defective motor or pump. For parts or assistance, call Simer Customer Service at 1-800-468-7867 / 1-800-546-7867 Operation OPERATION Risk of electrical shock. Can burn or cause death. Do not handle pump or pump motor with wet hands or when standing on wet or damp surface, or in wat...