Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
SM 2055E TABLE OF CONTENTS Introduction ....................................... 3 Symbols ............................................. 4 Warning Signs ................................... 4 Safety Regulations ............................ 5 Description ........................................ 7 Installation ....................................... 16 Fuel Handling .................................. 21 Starting and Stopping.....................23 Use.................................................... 25 Maintenance .................................... 29 Technical Data ................................. 33 2 – English INTRODUCTION Introduction This operator’s manual describes in detail how the one-man sawmill is used and maintained and how servicing is to be carried out. It also describes the measures to be taken for maximum safety and how the safety features are designed and function, as well as how they are inspected, maintained, and repaired if necessary. NOTE! The section dealing with safety must be read and understood by all those who install, use, or repair the sawmill. The operator’s manual comprises installation, usage, and the different maintenance procedures that can be performed by the operator. More comprehensive servicing or troubleshooting should be performed by the dealer’s service personnel. The operator’s manual describes all the requisite safety features and should be read and understood by the user before the sawmill is assembled. Symbols and warning signs shown on the next page can be found in this operator’s manual and on the one- man sawmill. If a decal on the sawmill has been damaged or is worn, a new warning decal must be applied as soon as possible in order to ensure the greatest possible safety when using the sawmill. The one-man sawmill shall only be used to cut boards and planks from logs. The one-man sawmill should be used outdoors and not in enclosed spaces. English – 3 KEY TO SYMBOLS Symbols The symbols below are used in this operator’s manual. Eye protection and hearing protection should be used. Boots or work shoes with steel toecaps and non-slip soles should be worn. Eye protection should be used. Protective gloves should be worn. Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance. Warning Signs The decal with the symbols below is found on the one- man sawmill. Eye protection and hearing protection should be used. Protective gloves should be worn. Boots or work shoes with steel toecaps and non-slip soles should be worn. Read this manual carefully and make sure you understand it before attempting to use the one- man sawmill. Exercise caution. 4 – English SAFETY REGULATIONS Safety Regulations ! WARNING! A one-man sawmill can be a dangerous tool that can cause ! WARNING! Always ensure good ventilation. Exhaust fumes and sawdust can serious or fatal injury if used incorrectly or carelessly. It is very cause injury or allergies. important that the person using the one-man bandsaw reads and understands the content of this manual. Personal Protective Equipment The person or persons using the one-man sawmill or remaining in its close proximity must be equipped with the personal equipment as set out below: 1. Hearing protection. 2. Eye protection. 3. Approved protective gloves. 4. Boots or work shoes with steel toecaps and nonslip soles. 5. First aid kit. English – 5 SAFETY REGULATIONS The One-man Sawmill Safety Equipment WARNING!! The one-man sawmill must never be used if any of the safety devices or guards is damaged or does not work. There are a number of safety devices and guards in order to prevent accidents when using the sawmill. These are described in the sawmill’s general description. See page 15. The safety devices and guards also require regular inspection and maintenance. Measures and intervals are documented in the section Maintenance. See page 29-32. Fuel Safety WARNING!! The fuel used in the one-man sawmill has the following hazardous properties: 1. The fluid, its vapour, and its exhaust fumes are poisonous. 2. Can cause skin irritation. 3. Is highly inflammable. Special safety regulations apply to the fuel used with the one-man sawmill. These are documented in the section Fuel Handling on page 21. Risk Zone The risk zone is evident from the picture to the right. No unauthorised persons may be present in the risk zone. The risk zone should also be kept free of foreign objects and the ground within the risk zone should be flat so that the operator avoids stumbling. Personnel The following apply to personnel using the one-man sawmill: 1. Shall have read and understood the content of this operator’s manual. 2. Must not be under the influence of alcohol or medication, nor suffering from tiredness. 3. Good lighting is required when using the sawmill outside daylight hours. 4. Shall not be a minor. 5. Earthed circuit breaker recommended. Safety During Use The safety regulations that apply while using the one- man ...
Este manual também é adequado para os modelos :Benzo e serras - SM 2186 (2.15 mb)