Assessments - 3, GPA: 3.7
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• Talk Press and hold for 3 seconds to enter Pairing mode.• Press to make or answer a call.• Press to end a call. • Press and hold to reject incoming call. • Press and hold to place a call on hold. • Press and hold to switch between calls.• Volume Press to adjust the volume.• Press and hold to turn the microphone on or off. • EnglishButton functions Button Function Power switch Slide up or down to turn the headset on or off. • Talk Press and hold for 3 seconds to enter Pairing mode.• Press to make or answer a call.• Press to end a call. • Press and hold to reject incoming call. • Press and hold to place a call on hold. • Press and hold to switch between calls.• Volume Press to adjust the volume.• Press and hold to turn the microphone on or off. • 5 Charging the headset Charging the headset This headset has a rechargeable internal battery which is non-removable. Make sure the headset is fully charged before using it for thefirst time. To checkthe battery level see page 7. 1 Connect the charger to the charging socket on the headset. 2 Plug the charger in to the wall outlet. During charging, the indicator light will turn red. If charging does not begin, unplug the travel adapter and plug it in again. 3 When the headset is fully charged, the red indicator light changes to blue. Unplug the travel adapter from the wall outlet and the headset. • Use only Samsung-approved chargers. Unauthorised or Non-Samsung chargers could cause damage to the headset or in extreme circumstances an explosion, it could also invalidate any warranty on the product. • Repeatedly charging and discharging of the headset, over time will cause the battery performance to diminish. This is normal for all rechargeable batteries. • Never make or receive calls while charging, always disconnect your headset from the charger and answer the call. • To save energy, unplug the travel adapter when not in use. The travel adapter does not have a power switch, so you must unplug the travel adapter from the outlet to interrupt the power supply. The travel adapter should remain close to the socket when in use. When the headset battery is low The headset beeps and the indicator light flashes red. If the headset powers off during a call, the call will be automatically transferred to the phone. Checking the battery level To check the battery level, press and hold the Volume down button and the Talk button at the same time. Depending on the battery level, the indicator lightflashes 5 times in one of the following colours: Battery level Above 80% Indicator light colour Blue 80 ~20% Violet Below 20% Red English 7 Wearing the headset Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly. . RightLeft . Wearing the headset Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly. . RightLeft . You can also use the optional earpiece cushions instead of the ear hook. Remove the earpiece cover and attach the earpiece cushion. Then, rotate the earpiece cushion left or right slightly depending on which ear you are going to Left • . Right wear the headset. If it does not fityour ear, replace it with the other. Using your headset This section explains how to turn the headset on, pair and connect to the phone, and use various functions. • Activated functions and features may differ depending on the phone type. • Some devices, especially those that are not tested or approved by Bluetooth SIG, may be incompatible with your headset. To ensure you get the best performance from your headset • Keep the distance between your headset and device as small as possible and avoid placing your body or other objects in the signals path. • If you usually use your mobile phone with your right hand, wear the headset on your right ear. • Covering your headset or device could effect its performance so keep contact to a minimum. Turning the headset on or off To turn the headset on Slide up the power switch.The blue indicator light flashes 4 times and you will hear “Power on”. To turn the headset off Slide down the power switch.The indicator light flashes blue and red then turns off and you will hear “Power off”. 9 English Using voice prompts Using voice prompts Voice prompts will inform you about the current status of the headset and usage instructions. If you can.t hear any voice prompts, make sure the voice prompt feature is turned on. If the headset is turned on for the first time, you will hear “Press both volume buttons simultaneously to select language.” Changing the language for the voice prompt The headset provides the following languages: English and German or English and French depending on the region you purchase the device. The default setting is English. • In Pairing mode, press and hold both volume buttons simultaneously to select language. Turning the voice prompt on or off To turn voice prompts on • In Pairing mode, press and hold the Volume up button for 3 seconds to turn the Voiceprompton. The...