Assessments - 3, GPA: 3
(
)
)
|
Fotos e especificações Nokia BH-903 |
Facilidade de uso
34. • Disconnect the headset in the Bluetooth menu of your device. You do not need to delete pairing with the headset to disconnect it. Reconnect the headset If the headset loses the connection to a paired device, you can connect the headset manually to the device. Switch on the headset, and do one of the following: • Make the connection in the Bluetooth menu of the paired device. • Press the menu key, and select > Connection and Call connections or Music connections. For details, see “Connections,” p. 34. Get started • Press and hold the answer/end key to connect to a device that supports the Hands-Free Bluetooth profile, or press and hold the play/pause key to connect to a device that supports the A2DP Bluetooth profile. You may be able to set your device so that the headset connects to it automatically when the headset is switched on. To do this in a Nokia device, change your paired device settings in the Bluetooth menu. ¦ Display When the headset is on but not used for about 10 seconds, the display goes to the power saving mode. In this mode, the display turns off for about 5 seconds and turns on for about 1 second at regular intervals. To activate the display when it is in the power saving mode, press any key. To activate the display and keys if the keys are locked, briefly press the power key. See also “Lock or unlock the keys,” p. 23. Get started Get started The headset is connected to a compatible device and ready for use. The headset is not connected to a compatible device. A call is in progress. A call is active and another call is on hold. You have missed calls. This indicator is not shown in the radio and music player modes. The microphone is muted (during a call). The battery is fully charged. The battery charge is low. The headset keys are locked. The headset is in the radio mode. Get started Get started The headset is in the music player mode. Basic use Basic use Basic use ¦ Wear the headset The headset comes with a pair of earphones with rubber earpads. If the rubber earpads are too small or not suitable for your ears, you can replace or cover them with the supplied foam earpads. For the best audio quality, cover the rubber earpads with the foam ones. To install the earpads, push them onto the earphones. To wear the headset, place the strap around your neck, and put the earphones into your ears. To adjust the length of the earphone cables, pull the cables toward or away from the earphones. Adjust the microphone as close to your mouth as possible for optimal audio quality. Basic use Basic use Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. ¦ Adjust the headset volume To adjust the headset volume, move your finger around the selection key on the touch sensitive area clockwise to increase or anticlockwise to decrease the volume. Use only one finger at a time. Alternatively, use the keys of your compatible mobile phone or music device. You can adjust the volume during a call or when you listen to the music player or radio. Basic use ¦ Lock or unlock the keys To lock or unlock the headset keys (also during a call), briefly press the power key. When the keys are locked, is displayed. When you make or receive a call, the key lock remains off until the call is ended, if you do not manually lock the keys during the call. When the key lock is on, the headset cannot be switched off, and the following key symbols are not shown: answer/ end key, rewind key, forward key, stop key, and play/pause key. To set the headset to automatically lock the keys, see “Automatic keylock,” p. 35. ¦ View current time The time is shown only if the headset is connected to a compatible Nokia device that provides the time to the headset and the time display is enabled in the device. Basic use Basic use d the selection key in the main menu. To view the time when the keys are locked, press and hold the selection key. ¦ Make a call To make a call, use your mobile phone in the normal way when the headset is connected to it. If your phone supports last number redialling with the headset, press the answer/end key twice when no call is in progress. See also “Recent calls,” p. 33. If your device supports voice dialling with the headset, press and hold the answer/end key when no call is in progress, and proceed as described in the phone user guide. To end a call, press the answer/end key. ¦ Answer a call To answer a call, press the answer/end key. To reject a call, press the answer/end key twice. Basic use ¦ Mute or unmute the microphone To mute or unmute the microphone, press the mute key during a call. ¦ Switch the call between headset and phone To switch the call from the headset to the connected phone, press and hold the power key (the headset switches off), or use the keys of your phone. To switch the call back to the headset, switch on the headset, or press and hold the answer/end key (when the headset is on). ¦ Call waiting Call w...