Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
Multi- Mixer AssemblyCAUTION: Ensure that the appliance is unplugged from the electrical power source before changing attachments. Do not immerse the mixer gear box in water. 1. To attach the mixer gear box to the power pack, line up arrow on the power pack and mixer gear box. 2. Push power pack onto mixer gear box until seated. 3. While grasping mixer gear box rotate it 90. clockwise until the arrow on the power pack aligns with the “Square” on the mixer gear box. 4. To disassemble mixer gear box and power pack rotate mixer gear box 90. counterclockwise. Attaching the Attachments to the Gear BoxCAUTION: Ensure that the appliance is unplugged from the electrical power source before changing attachments. Do not immerse the gear box in water. Select the desired attachment, either the dough hooks, wire beaters or whisk and assemble to gear box as noted below: Note: When inserting dough hooks or beater attachments, make sure to insert the piece with the ring on the shaft into the larger opening of the gear box. 1. After attaching the desired accessory into the gear box, plug the mixer into power source. 2. Hold the power pack with one hand and press and hold the On/Off switch with your index finger. 3. Ensure that there are no obstructions and that the accessories are moving freely in the mixing container. 4. When finished using the unit, unplug the unit before removing the accessories.Dough Hooks (x2) : For use with light dough ONLY. • Insert stem end of dough hooks (one at a time) into opening in base of gear box. • Rotate slightly while pressing gently until dough hook “clicks” into place. • Repeat for second dough hook. • Ensure that dough hooks are well seated in mixer gear box. Wire Beaters (2): Follow same installation procedure as above.Wire Whisk:This attachment is used for beating air into mixtures such as egg whites, yolks or creams.• To install, place stem of wire whisk into either of the openings in the mixer gear box. • Rotate wire whisk while pushing gently until wire whisk “clicks” into place. • Ensure that wire whisk is well seated in gear box. 3 The STICK BLENDER is an indispensable kitchen tool for blending, chopping, mixing or pureeing when preparing your favorite recipes. The interchangeable accessories and attachments that come with your unit are powered by a high efficiency 350 watt power pack. For best results, be sure to carefully read all the instructions contained in this book before using this appliance. 350 Wat Power Pack The 350 Watt Power Pack operates on 120V., 60Hz. electrical power. Never allow the power pack to become wet when plugged into an electrical outlet. WARNING: The power pack should never be immersed in water. CAUTION: Make sure that the power pack is unplugged from power source before attaching or removing any accessory. To use the power pack with any of the Stick Blenderaccessories, place it on the attachment shaft aligning the arrows on the power pack and accessories to be used and turn it counterclockwise 90. until the arrow on the power pack aligns with the square. To remove the power pack, turn it clockwise. To operate the power pack, press on the switch button located on the top of the unit. The power pack will stop operating when you remove your finger from the switch button. Variable Speed Control There is a variable speed control located at the top of the power pack. To vary the speed of your blenderrotate the round knob at the top of the power pack. From the low setting turn the variable speed control clockwise to increase speed and counterclockwise to reduce speed. 4 Text Box: Operating Instructions Operating InstructionsStick Blender AttachmentCAUTION: Blade is sharp. Detach stick blender from power pack and wash with warm soapy water. Do notuse any sharp pointed objects to clean residues from under the blade. Wall BracketA wall bracket is provided with your stick blender. Install the wall bracket in any convenient location using the wall anchors and screws (included) . The Power Pack with or without the Stick Blender attachment may then be conveniently stored out of the way. (Fig. 1)IMPORTANT: Install wall mount bracket high enough above countertop to allow for clearance of power pack with stick blender attached. Fig. 1 Text Box: Operating Instructions Operating Instructions Assembling the Stick Blender: Make sure that the unit is unplugged from power source before attaching or removing any of the stick blender attachments. WARNING: This appliance is designed for intermittent use. Maximum running time with the stick blender is 1 minute. After this time, allow the unit to cool. 1. Line up arrow of stick blender attachment with arrow on power pack. Once fully inserted, rotate stick blender attachment clockwise 90. until arrow on power pack aligns with square on stick blender. (Fig. 2) 4. Place the metal stick blender first into the food to be chopped or pureed before pressing the On/Off Switch to avoid spattering. 5. Use the variable speed control knob to ...
Este manual também é adequado para os modelos :Blenders - BRAVETTI FP200HC (133.95 kb)