Assessments - 3, GPA: 5
(
)
)
|
Facilidade de uso
Smoothie button 4 USK BL 24242/BL 25280 -090602 IMPORTANT INFORMATION This appliance is not for professional use. You should follow the requested breaks. Failure to follow this instruction carefully may result in damage to the motor. The maximum continuous usage time is 3 minutes. After 3 minutes of continuous use, you should insert a break of at least 10 minutes. ASSEMBLY OF THE BLENDER AND USE CAUTION! Your appliance is fitted with a security device allowing the functioning of the appliance only when the jar is correctly placed on the motor block. If the jar is correctly positioned and the appliance does not start, call your after sales service. If the blade is disassembled from the bottom of the jar, check the cleaning section for mounting instructions before continuing. • Press the press ring into the bottom of glass jar. • Put the silicone sealing ring carefully on the inner edge of the blade unit. • Put the blade unit with sealing ring into the jar base. • Assemble the pouring jar on jar base of the motor block by turning it clockwise and make sure it is correctly positioned, otherwise the appliance will not work. • Remove the lid of the blender. • Fill the pouring jar with the chosen ingredients. • Close the lid. Place the measuring cap into the hole of the lid and turn clockwise to lock. • Plug in the appliance. • Choose the mixing speed with the rotary button on the motor base. Pulse function The position "P" (Pulse) is particular because the button has to be kept manually. This position is generally used to crush ice in order to avoid damages on the blades, but it can also be used to complete the mixing. The blender runs in high speed as long as you push the 5 USK BL 24242/BL 25280 -090602 button. This button is only intended for short powerful bursts, not continued use. You might damage your appliance is using the “Pulse button” continuously. Smoothie function Press “smoothie button”, the blender keeps on running in high speed. After pressing the “smoothie button” again, the blender will stop working and all the three indicator lamps will flash. Ice crushing function Your blender is equipped with six blades and is perfectly adapted to ice crushing. Press the “ice button”, the blender runs in 1 second blending and 0.5 second stop cycles, the pilot light is ON (the other two indicator lamps are OFF). Once the desired level of grinding is achieved, press the “ice button” again, the motor will stop working and all the three indicator lamps will flash. Note : These three push buttons can be pushed at wish, no matter what situation it is running. The rotation speed is factory set for each function, and the rotary speed control is disabled in case the automatic functions such as “Ice Crushing” or “Smoothie” are selected. The Blender always runs in high speed in such situation. • It is also possible to add liquids or other ingredients anytime without stopping the appliance. You only have to remove the cap, which closes the feeding opening by turning and raising it straight up. • Once you have finished the preparation, stop the appliance and unplug the appliance. • Remove the jar from the base. Then remove the lid and pour the liquid in the desired receptacle. 6 USK BL 24242/BL 25280 -090602 Manual Speed setting Turn the rotary knob from “MIN” position to “MAX” position to select the desired speed. The blender runs from low speed to high speed. In manual speed setting, the “ice button”, “smoothie button” and “pulse button” are disabled • Blender stops running if the current is above the limitation and the pilot light of “pulse button” flashes, press “pulse button” again and the appliance resume working. • No matter in what mode the blender is working, just lift glass jug from the motor block to stop the appliance. To resume operating the blender, set the speed rotary knob back to “off” position, replace the jug, select the “On” position and choose the function or turn the rotary knob to select speed. HOW TO CLEAN • Always unplug from outlet before cleaning. • For a quick rinsing of the pouring jar (for example between two preparations), you can use clear water and switch on your appliance for a few seconds. In this case, do not use any detergent. • For a full cleaning of the pouring jar, remove it from the motor block and unscrew the base of the blade assembly by turning it anti-clockwise to disassemble it (this will make the cleaning easier). Then you can clean the blades and the jar with soapy water and rinse thoroughly with clear water. Dry before assembling. Therefore you only have to screw the blades support by turning it clockwise in the bottom of the pouring jar (tighten vigorously in order to avoid leaks). Attention, do not lose the sealing ring during this operation. • You can wipe the motor block with a soft damp cloth. • IMPORTANT : the borosilicate jar of your blender is designed to support sudden temperature variations up to 50°C / 125°F. After preparing an icy preparation, it is important to...
Este manual também é adequado para os modelos :Blenders - BATIDORA DE VASO BL 24242 (296.67 kb)