Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
3). Press and hold the normal or turbo speed button to switch on the appliance (Fig. 4). Note:When you use the turbo speed button, the appliance operates at maximum speed. 5 Blend the ingredients by moving the appliance slowly up and down and in circles (Fig. 5). Food processor Blade unit The blade unit is intended for chopping ingredients such as nuts, meat, onions, hard cheese, boiled eggs, garlic, herbs, dr y bread etc. The blades are very sharp! Be very careful when you handle the blade unit, especially when you remove it from the bowl, when you empty the bowl and during cleaning. Place the tool holder in the bowl (Fig. 6). Remove the protective cover from the blade unit. Put the blade unit on the tool holder (Fig. 7). Put the ingredients in the bowl. 1 2 3 4 See the table below for the recommended quantities and processing times. chopping quantities and processing times Ingredients Quantity Time Parsley 100g 30sec. Onions & eggs 500g 7 x 1sec.(pulse) Meat 300g 30sec. Parmesan 300g ~ 60sec. Nuts 500g ~ 30sec. Dark chocolate 200g ~ 45-60sec. Put the lid on the bowl (1).Turn the lid anticlockwise (2) to fix it (‘click’) (Fig. 8). 5 6 7 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 9). Put the pusher in the feeding tube. Note:The pusher prevents spillage. 8 Press and hold the normal or turbo speed button to switch on the appliance (Fig. 4). Note: If the ingredients stick to the wall of the bowl, release the button to switch off the appliance and loosen the ingredients with a spatula or add some liquid. Note: Always let the appliance cool down after chopping meat with the blade unit. 9 After processing, release the normal or the turbo speed button to switch off the appliance and wait until the blade unit has stopped rotating. 10 Press the lid release button on the bowl (1) and turn the lid clockwise to remove it (2). (Fig. 10) EnglisH tips -The appliance chops ver y quickly. Use the normal speed button or the turbo speed button. If you use the turbo speed button, use it briefly to prevent the food from becoming too finely chopped. -Do not let the appliance run too long when you chop (hard) cheese or chocolate. Otherwise these ingredients become too hot, star t to melt and turn lumpy. -Do not use the blade unit to chop ver y hard ingredients like coffee beans, turmeric, nutmeg and ice cubes, as this may cause the blade to get blunt. combination disc The combination disc is intended for slicing and shredding vegetables like cucumber, carrots, potatoes, leek and onions and cer tain kinds of cheese. One side is intended for slicing and the other side for shredding.You can switch from slicing to shredding and the other way round by simply turning the disc. Never process hard ingredients like ice cubes with the disc. The cutting edges of the disc are very sharp. Do not touch them. Place the tool holder in the bowl (Fig. 6). Place the combination disc on the tool holder with the slicing or shredding side facing up, depending on the result you want (Fig. 11). Put the lid on the bowl (1).Turn the lid anticlockwise (2) to fix it (‘click’) (Fig. 8). Put the ingredients in the feeding tube. 1 2 3 4 -Pre-cut large ingredients into chunks that fit in the feeding tube. -Fill the feeding tube evenly for the best results. -When you have to process a large amount of ingredients, process small batches and empty the bowl between batches. -To shred cheese, e.g. Parmesan, Gouda or Emmentaler, the cheese should be at refrigerator temperature. 5 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 9). 6 Press and hold the normal or turbo speed button to switch on the appliance (Fig. 4). 7 Press the pusher lightly onto the ingredients in the feeding tube. Whisk Connect the whisk to the coupling unit (Fig. 12). Connect the coupling unit to the motor unit (‘click’) (Fig. 13). Put the ingredients in a bowl. Whisking quantities and processing times The whisk is intended for whipping cream, whisking egg whites, desser ts etc. 1 2 3 Cream 250ml 70-90sec. Egg white 4 eggs 120sec. Ingredients Quantity Time Note: Do not process more than 1 batch without interruption. Let the appliance cool down to room temperature before you continue processing. 10 EnglisH 4 5 Immerse the whisk completely in the ingredients.To avoid splashing, start processing at normal speed by pressing the normal speed button. (Fig. 14) Continue with turbo speed after approx. 1 minute by pressing the turbo speed button. cleaning (Fig. 15) Do not immerse the motor unit, the whisk coupling unit or the lid of the bowl in water. Clean these parts with a moist cloth. Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Clean the blender bar blades, the blade unit and the combination disc very carefully.Their cutting edges are very sharp. Unplug the appliance. Press the release buttons on the motor unit to remove the blender bar, the whisk coupling unit or to detach the motor unit fr...