Log:
Assessments - 0, GPA: 0 ( )

Instruções de Operação Philips, Modelo HR1362/00

Fabricante : Philips
Arquivo Tamanho: 689.91 kb
Arquivo Nome :
Língua de Ensino: enespt
Ir para baixar



Facilidade de uso


(Fig. 4) Preparing for use 1 2 3 Let hot ingredients cool down before chopping them or pouring them into the beaker (max. temperature 80 °C). Cut large ingredients into pieces of approximately 2 cm before processing them. Assemble the appliance properly before plugging it into the wall socket. Using the appliance Hand blender Attach the blender bar to the motor unit (‘click’) (Fig. 3). Immerse the blade guard completely in the ingredients (Fig. 5). Switch the appliance on by pressing the normal or turbo speedbutton. Blend the ingredients by moving the appliance slowly up and downand in circles (Fig. 6). Chopper (HR1364/1363 only) The hand blender is intended for : -blending fluids, e.g. dair y products, sauces, fruit juices, soups, mixed drinks and shakes. -mixing soft ingredients, e.g. pancake batter or mayonnaise. -pureeing cooked ingredients, e.g. for making baby food. 1 2 3 4 The chopper is intended for chopping ingredients such as nuts, meat, onions, hard cheese, boiled eggs, garlic, herbs, dr y bread etc. The blades are very sharp! Be very careful when handling the blade unit, especially when removing it from the chopper bowl, when emptying the chopper bowl and during cleaning. 1 2 3 4 5 Put the chopper blade unit in the chopper bowl (Fig. 7). Put the ingredients in the chopper bowl. Put the coupling unit onto the chopper bowl (Fig. 8). Fasten the motor unit onto the chopper bowl (‘click’) (Fig. 9). Switch the appliance on by pressing the normal or turbo speed button. If the ingredients stick to the wall of the chopper bowl, loosen them , by adding liquid or using a spatula. Always let the appliance cool down after chopping meat. , Whisk (type HR1364/HR1362 only) The whisk is intended for whipping cream, whisking egg whites, desser ts etc. 1 2 3 Connect the whisk to the coupling unit (Fig. 10). Connect the coupling unit to the motor unit (‘click’) (Fig. 11). Put the ingredients in a bowl. Tip: Use a large bowl for the best result. 4 5 Immerse the whisk completely in the ingredients and to avoidsplashing start processing at normal speed by pressing the normalspeed button. (Fig. 12) Continue with turbo speed after approx. 1 minute by pressing the turbo speed button. Cleaning 1 2 Unplug the appliance and detach the accessories before cleaning. Clean the beaker, the chopping bowl (HR1364/HR1363 only), thechopper blade unit(HR1364/HR1363 only) and the whisk withoutcoupling unit (HR1364/HR1362 only) in the dishwasher or in warm water with some washing-up liquid. It is recommended to remove the rubber ring from the chopper bowl before cleaning. 2 3 3 The blade unit of the blender bar and the whisk can also be cleaned while still attached to the motor unit by immersing them in warmwater with some washing-up liquid and letting the appliance run for awhile. 4 Wipe the motor unit, the whisk coupling unit (HR1364/HR1362 only) and the chopper coupling unit (HR1364/HR1363 only) with a moistcloth. Do not immerse the motor unit, the whisk coupling unit (HR1364/ HR1362 only) and the chopper coupling unit (HR1364/HR1363 only) in water. Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this you ...

Este manual também é adequado para os modelos :
Blenders - HR1361/00 (689.91 kb)
Blenders - HR1363/00 (689.91 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias