Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Ice cubes 6 pieces 10sec. Ingredients Chopping quantity(max.) Time (max.) 3 4 5 Put the chopper coupling unit on the chopper bowl (Fig. 10). Fasten the motor unit onto the coupling unit (‘click’) (Fig. 11). Press and hold the unlock button (1) and then press and hold the power-on button (2) within 2 seconds (Fig. 7). EnglisH Note: If you do not press the power-on button within 2 seconds, the charging light flashes red and the appliance remains locked.To unlock the appliance, repeat step 5. The appliance starts to operate. , -Release the unlock button when the appliance star ts to operate. -When you release the power-on button, the appliance switches off. -If you want to pulse chop, keep the unlock button pressed and press the power-on button a few times in quick succession. -If the ingredients stick to the wall of the chopper bowl, loosen them with a spatula or add some liquid. -After processing one batch, let the appliance cool down to room temperature before you continue processing. 6 7 Detach the chopper after use and clean it (see chapter ‘Cleaning’). To prevent injuries, place the protection covers on the chopper blade units when you store them. cleaning (Fig. 12) Do not immerse the motor unit, the charging stand, the adapter and the chopper coupling unit in water. Do not touch the blades when you clean them.They are very sharp. 1 2 Press the release button on the motor unit (1) to remove the blender bar or chopper coupling unit (2). (Fig. 13) Disassemble the rest of the parts. Tip:You can also clean the blade of the blender bar while it is still attached to the motor unit. Immerse the blade guard in warm water with some washing-up liquid and let the appliance run for a while. Tip:You can also remove the rubber rings from the chopper bowl for extra thorough cleaning. 3 See the separate cleaning table for further instructions. 10 EnglisH storage 1 2 Keep the charging stand plugged in continuously and store the appliance in the charging stand.This ensures that the appliance is always ready for use. Store the mains cord by winding it round the reel in the bottom ofthe charging stand. Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preser ve the environment (Fig. 14). -The built-in rechargeable batteries contain substances that may pollute the environment. Always remove the batteries before you discard and hand in the appliance at an official collection point. Dispose of the batteries at an official collection point for batteries. If you have trouble removing the batteries, you can also take the appliance to a Philips ser vice centre. The staff of this centre will remove the batteries for you and will dispose of them in an environmentally safe way (Fig. 15). Removing the rechargeable batteries Only remove the rechargeable batteries when you discard the appliance. The appliance does not work anymore after you have cut the wires that connect the rechargeable batteries to the motor unit. Only remove the rechargeable batteries when they are completely empty to avoid a hazard. Never let the batteries come into contact with metal. 1 2 3 Remove the blender bar or chopper coupling unit from the motor unit. Let the appliance run until it stops. , Press the unlock button and fix it in this position with adhesive tape. The charging light starts to flash red.When the charging light goes out, the rechargeable batteries should be completely empty. 4 5 6 7 8 9 Try to switch on the appliance again to check if the rechargeable batteries are really empty. If the motor starts, repeat the procedure. Insert a screwdriver into one of the four slots of the aluminium top cover.Then twist the screwdriver to remove the top cover (Fig. 16). Undo the two screws (Fig. 17). Pull the top part of the motor unit with the rechargeable batteries attached to it out of the housing (Fig. 18). Put the top part with the rechargeable batteries attached to it in a bowl with one litre of water and 1 teaspoon of salt and leave it in this bowl for 24 hours. Take the top part with the rechargeable batteries attached to it from the bowl and cut the wires that connect the batteries to the motor unit. (Fig. 19) 10 Bend the battery cover to detach it from the top part (Fig. 20). 11 You can dispose of the complete battery cover with the 2 rechargeable batteries in it at an official collection point for batteries (see above).You can also remove the battery cover to separate the two rechargeable batteries and then dispose of them. 12 To remove the battery cover, bend the tab that holds the two rechargeable batteries in place outwards and pull the batteries out of the battery cover (Fig. 21). guarantee and service Exceptional guarantee and service You have bought a culinar y tool for life and we want to ensure that you remain satisfied. We would like you to register your purchase, so that we can stay in contact with you...