Assessments - 5, GPA: 3.8
(
)
)
|
Facilidade de uso
#BL7554 PRINTED IN CHINA Introduction The Model G9017/G9018 (Figure 1) is designed for bending thick walled pipes (schedule 40 and 80) and has six different bending dies ranging in size from 1.2" to 2" for the G9017 (see Figure 2) and from 1.2" to 3" for the G9018. The Model G9017/G9018 is not designed for bending thin walled pipes or exhaust pipe. We stand behind our machines. If you have any service questions or parts requests, please contact us. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 Fax: (800) 438-5901 E-Mail: techsupport@grizzly.com Web Site: Technical Data Maximum Working Pressure: ............... 6259 PSI Maximum Load................................. 24,000 Lbs. Maximum Travel............................................9 1.2" Pipe Size Capacity ...................... (G9017) 1.2"–2" ..................... (G9018) 1.2"–3" Maximum Pipe Wall Thickness.................0.179" Hydraulic Oil Reservoir Capacity .......... 2.5 Pints Type of Hydraulic Oil.....................................H32 Weight ...................................... (G9017), 90 Lbs. ........................................(G9018), 150 Lbs. Size Schedule 40 1.2" YES 3.4" YES 1" YES 11.4" YES 11.2" YES 2" YES 21.2" YES 3" YES Schedule 80 YES YES YES NO NO NO NO NO Inventory (Figures 1 & 2) A. Bender........................................................ 1 B. Dies, (G9017) 1.2", 3.4", 1", 11.4", 11.2", 2").....6 C. Dies, (G9018) 1.2", 3.4", 1", 11.4", 11.2", 2", 21.2", 3")............................................................... 8 D. Pump Handle Bar.......................................1 Figure 1.Model G9017. Pump Handle BarSocket Figure 2.Model G9017 bending dies. The Model G9017/G9018 is a heavy machine (93/152 lbs. shipping weight). DO NOT over-exert yourself while unpacking or mov- ingyourmachine—get assistance. OPERATION To bend a pipe: 1. Insert the pump handle bar into the socket on the tube bender shown in Figure 1. 2. Choose the proper size bending die and slip it on the end of the ram as shown in Figure 3. 5. Reinstall the roller shafts and hitch pins. 6. Place the pipe over the bending die. Note: To account for pipe shortening during the bend, make sure the pipe extends beyond the rollers (Figure 5) and, for short pipe, set the rollers closer together, as shown in Figure 6. Bending Die Figure 3. Die installed on bottle jack ram. 3. Choose an angle to bend your pipe. To make a 35-45. bend, place the rollers between the far outside holes on the frame. To make a 90. bend, place the rollers between the holes closest to the ram. Placing the rollers further inside the frame increases the bending angle. 4. To move the rollers, remove the hitch pins and roller shafts (Figure 4), and place the rollers between corresponding holes on each side of the frame. Rollers Hitch Pins Figure 5. Pipe installed beyond rollers to account for pipe shortening during the bend. Figure 6. Rollers set close together f...
Este manual também é adequado para os modelos :Blenders - G9017/G9018 (1.53 mb)
Blenders - G9017/G9018 (1.53 mb)
Blenders - G9017/G9018 (1.53 mb)