Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
Only use a moist cloth to clean the motor unit. Warning - Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance. - Do not use the appliance if the plug, the mains cord or other parts are damaged. - If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. - Never let the appliance run unattended. - This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety - Children should be supervised to ensure that they do not play with the appliance. - Do not touch the blades, especially when the appliance is plugged in. The blades are very sharp. - If the blades get stuck, unplug the appliance before you remove the ingredients that block the blades. Caution - Switch off the appliance and disconnect it from the mains before you change accessories or approach parts that move during use. - This appliance is intended for household use only - Do not exceed the quantities and processing times indicated in the table. - Do not process more than three batches without interruption. Let the appliance cool down to room temperature before you continue processing. Electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today Overheat protection This appliance is equipped with overheat protection. If the appliance overheats, it switches off automatically Unplug the appliance and let it cool down for 5 minutes. Then put the mains plug back into the wall socket and switch on the appliance again. Please contact your Philips dealer or an authorised Philips service centre if the overheat protection is activated too often. ■ Before first usei Thoroughly clean the parts that will come into contact with food before using the appliance for the first time (see chapter 'Cleaning'). ■ Preparing for usei l| Let hot ingredients cool down before chopping them or pouring them into the beaker (max. temperature 80 °C). 2 | Cut large ingredients into pieces of approximately 2 cm before processing them. 3| Assemble the appliance properly before plugging it into the wall socket. ■ Using the appliance! Hand blender The hand blender is intended for: - blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks and shakes. - mixing soft ingredients, e.g. pancake batter or mayonnaise. - pureeing cooked ingredients, e.g. for making baby food. l| Attach the blender bar to the motor unit (‘click') (Fig. 2). 2 | Immerse the blade guard completely in the ingredients (Fig. 3). 3| Switch the appliance on by pressing the normal or turbo speed button. 4| Blend the ingredients by moving the appliance slowly up and down and in circles (Fig. 4). Chopper (HR1364/1363 only)_ The chopper is intended for chopping ingredients such as nuts, meat, onions, hard cheese, boiled eggs, garlic, herbs, dry bread etc. The blades are very sharp! Be very careful when handling the blade unit, especially when removing it from the chopper bowl, when emptying the chopper bowl and during cleaning. l| Put the chopper blade unit in the chopper bowl (Fig. 5). 2 | Put the ingredients in the chopper bowl. 3| Put the coupling unit onto the chopper bowl (Fig. 6). 4| Fasten the motor unit onto the chopper bowl (‘click') (Fig. 7). 5| Switch the appliance on by pressing the normal or turbo speed button. ► If the ingredients stick to the wall of the chopper bowl, loosen them by adding liquid or using a spatula. ► Always let the appliance cool down after chopping meat. Whisk (type HR1364/HR1362 only)_ The whisk is intended for whipping cream, whisking egg whites, desserts etc. l| Connect the whisk to the coupling unit (Fig. 8). 2 | Connect the coupling unit to the motor unit (‘click') (Fig. 9). 3| Put the ingredients in a bowl. Tip: Use a large bowl for the best result. 4| Immerse the whisk completely in the ingredients and to avoid splashing start processing at normal speed by pressing the normal speed button. (Fig. 10) 5| Continue with turbo speed after approx. 1 minute by pressing the turbo speed button. l| Unplug the appliance and detach the accessories before cleaning. Clean the beaker, the chopping bowl (HR1364/1363 only), the chopper blade unit(HR1364/1363 only), the chopper coupling unit (HR1364/1363 only) and the whisk without coupling unit (HR1364/1362 only) in the dishwasher or in warm water with some washing-up liquid. It is recommended to remove the rubber ring from the chopper bowl before cleaning. 3| The blade uni...
Este manual também é adequado para os modelos :Blenders - HR1364/00 (3.67 mb)