Assessments - 6, GPA: 4.2 ( )

Fabricante : Philips Arquivo Tamanho: 4.55 mb Arquivo Nome : bdp5012_f7_dfu_aen.pdf Língua de Ensino:

MPEG NR 3D NR Combo (3D + MPEG) Introduction Connections Basic Setup Playback Others Function Setup LIST OF SETTINGS Category Menus/Options Description Advanced Setup Audio Night Mode On Compresses the range between soft and loud sounds. “On”: Activates the Night Mode. “Off”: Deactivates the Night Mode. Off Down Sampling On Sets the sampling rate for outputting the PCM audio from the digital output (coaxial/optical). “On”: Over 96 kHz PCM audio will be down sampled at 48 kHz. “Off”: For BD or DVD recorded in LPCM without copyright protection, 2-channel audio signals up to 96 kHz are output as LPCM signals. Off Virtual Surround On Select “On” to enjoy the stereophonic virtual space through your existing 2 channel stereo system during playback of BD-video or DVD-video. Off Blu-ray Disc Audio Mix Audio Output “Mix Audio Output”: The audio for the secondary video and the interactive application will be output together with the audio for the primary video. “Primary Audio Only”: Only the audio for the primary video will be output. When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the “Primary Audio Only” even if the “Blu-ray Disc Audio” is set to “Mix Audio Output”. Primary Audio Only HDMI Audio •This feature is available only when the display device is connected by an HDMI cable. • Refer to page 39 for more information. HDMI Normal Sets the audio format for the sound output from the HDMI OUT. PCM Off Digital Out • When HDMI cable is connected, make sure “HDMI Audio” setting is set to “Off” to change the “Digital Out” setting. • Refer to page 40 for more information. Bitstream Sets the audio format for the sound output from the DIGITAL OUT (OPTICAL/COAXIAL). PCM 34 EN LIST OF SETTINGS 35EN Category Menus/Options Description Advanced Setup Audio Analog Audio • When HDMI cable is connected, make sure “HDMI Audio” setting is set to “Off” to change the “Analog Audio” setting. Speaker Setup • Refer to page 41 for more information. Front (L/R) Large/Small Sets the speaker configuration to match the size/number of your speakers. • You can also output the test tone from each speaker by pressing [RED]. Center Large/Small/Off Surround (L/R) Large/Small/Off Subwoofer On/Off Speaker Distance Unit Feet Sets the desired measure system. This measure system will be used for “Speaker Distance” setting. Meters Front (L/R) 0-60 ft default is 10 ft Select the distance from the listening point to the speaker to get the ideal delay time. Center 5-10 ft default is 10 ft Surround 0-10 ft default is 10 ft Default Yes/No default is “No” Speaker Level Front (L) 0-12 dB default is 0 dB Sets the volume level for each speaker to get the ideal audio balance. Center Front (R) Subwoofer Surround (R) Surround (L) Ratings Lock • Refer to page 41 for more information. Rating Level All Sets the rating level for the disc playback. 8 [Adult] to 1 [Kid Safe] New PIN Sets the new password for the “Ratings Lock” setting. Others Angle Icon On “On”: The angle icon automatically appears on the TV screen when playing back content with various camera angles available. “Off”: The angle icon does not automatically appear on the TV screen when playing back content with various camera angles available. Off Auto Standby On Sets whether to turn off the unit (to the standby mode) automatically after 25 minutes of no action since the screen saver is activated. • If the screen saver is off, the unit will be turned off after 30 minutes if no action. Off Front Panel Brightness Bright Dim Sets the brightness of the front panel display. When “Auto” is selected, the front panel display automatically goes dim during playback. Auto Screen Saver On Sets whether to activate the screen saver after 5 minutes of no action on the unit. Off Slide Show Slide Show Interval 5sec Sets the amount of time for displaying one picture before switching to the next one. For example, select “5sec” to switch the picture every 5 seconds. 10sec Slide Show Transition Cut In/Out Sets the visual effect for the slide show transition mode. “Cut In/Out”: The pictures will cut in and out sharply as playback progresses. “Fade In/Out”: The pictures will fade in and out as playback progresses. Fade In/Out Introduction Connections Basic Setup Playback Others Function Setup LIST OF SETTINGS Category Menus/Options Description Advanced Setup Others DivX® VOD Your registration code is : ................ To learn more visit This menu item provides you with the DivX® VOD registration code. The DivX® registration code is required when downloading the DivX® VOD files from the Internet. To learn more about DivX® VOD, visit EasyLink (HDMI CEC) •This feature is available only when the display device is connected with an HDMI cable, and when it supports EasyLink (HDMI CEC) feature. • Refer to page 42 for more information. On Sets whether to utilize the EasyLink (HDMI CEC) function. EasyLink (HDMI CEC) function allows your PHI...

Baixe o seu

Para fazer o download, introduza 2 dígitos :