Assessments - 3, GPA: 4
(
)
)
|
Fotos e especificações Sony BDP-S185 |
Facilidade de uso
, The region code on the BD or DVD does not match the player. USB device The player does not detect a USB device connected to the player. , Make sure that the USB device is securely connected to the USB jack. , Check if the USB device or a cable is damaged. , Check if the USB device is on. , If the USB device is connected via a USB hub, connect the USB device directly to the player. Sony Entertainment Network The picture/sound is poor/certain programmes display a loss of detail, especially during fast-motion or dark scenes. , Picture/sound quality may be poor depending on Internet content providers. , Picture/sound quality may be improved by changing the connection speed. Recommended connection speed is of at least 2.5 Mbps for standard definition video (10 Mbps for high definition video). , Not all videos will contain sound. The picture is small. , Press M to zoom in. The player cannot connect to the network. , Check the network connection (page 11) and the network settings (page 18). The message [A new software version is available. Please go to the “Setup” section of the menu and select “Network update” to perform the update.] appears on the screen when turning the player on. , See [Network Update] (page 15) to update the player to a newer software version. Control for HDMI (BRAVIA Sync) The [Control for HDMI] function does not work (BRAVIA Sync). , Check that [Control for HDMI] is set to [On] (page 18). , If you change the HDMI connection, turn the player off and on again. , If power failure occurs, set [Control for HDMI] to [Off], then set [Control for HDMI] to [On] (page 18). , Check the following and refer to the instruction manual supplied with the component. – the connected component is compatible with the [Control for HDMI] function. – the connected component’s setting for the [Control for HDMI] function is correct. , When you connect the player to a TV through an AV amplifier (receiver), – if the AV amplifier (receiver) is not compatible with the [Control for HDMI] function, you may be unable to control the TV from the player. – if you change the HDMI connection, disconnect and reconnect the mains lead, or a power failure occurs, try the following: 1Switch the input selector of the AV amplifier (receiver) so that the picture from the player appears on the TV screen. 2Set [Control for HDMI] to [Off], then set [Control for HDMI] to [On] (page 18). Refer to the instruction manual supplied with the AV amplifier (receiver). Additional Information 21 The System Power-Off function does not work (BRAVIA Sync). , Check that [Control for HDMI] and [HDMI:Linked to TV-off] are set to [On] (page 18). Others Playback does not start from the beginning of content. , Press OPTIONS, and select [Play from start]. Playback does not start from the resume point where you last stopped playing. , The resume point may be cleared from memory depending on the disc when – you open the disc tray. – you disconnect the USB device. – you play other content. – you turn off the player. The disc tray does not open and you cannot remove the disc even after you press Z. , Try the following: 1Turn the player off, and disconnect the mains lead. 2Reconnect the mains lead while pressing down Z on the player. 3Keep pressing down Z on the player until the tray opens. 4Remove the disc. 5Hold down [/1 on the player for more than 10 seconds until the player turns off. The player does not respond to any button. , Moisture has condensed inside the player (page 3). , Hold down [/1 on the player for more than 10 seconds until the player turns off. If the player still does not respond to any button, disconnect then reconnect the mains lead. Specifications System Laser: Semiconductor laser Inputs and outputs (Jack name: Jack type/Output level/Load impedance) LINE OUT R-AUDIO-L: Phono jack/2 Vrms/10 kilohms DIGITAL OUT (COAXIAL): Phono jack/0.5 Vp-p/75 ohms HDMI OUT: HDMI 19-pin standard connector LINE OUT VIDEO: Phono jack/1.0 Vp-p/75 ohms LAN (100): 100BASE-TX Terminal USB: USB jack Type A, maximum current 500 mA (For connecting USB device) General Power requirements: 220–240V AC, 50/60Hz Power consumption: 10 W Dimensions (approx.): 290 mm. 196 mm . 43mm (width/depth/height) incl. projecting parts Mass (approx.): 1.1 kg Operating temperature: 5.C to 35 .C Operating humidity: 25 % to 80% Supplied accessories • Audio/video cable (phono plug .3) (1) (Australian/New Zealand model only) • Remote commander (remote) (1) • R6 (size AA) batteries (2) Specifications and design are subject to change without notice. Playable discs Playable discs BD-ROM BD-R*2/BD-RE*2 DVD*3 DVD-ROM DVD-R/DVD-RW DVD+R/DVD+RW CD*3 CD-DA (Music CD) CD-ROM CD-R/CD-RW *1 Since the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and the version. The audio output differs depending on the source, connected output jack, and selected audio settings. *2 BD-RE: Ver.2.1 BD-R: Ver.1.1, 1.2, 1.3 including organic pigment type BD-R...