Assessments - 4, GPA: 3.3
(
)
)
|
Facilidade de uso
. Select the D. IN mode. Method 3 AUX IN : Connecting an External Analogue Component Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the external analogue component. . Select the AUX mode. • Be sure to match the colours on the cable plugs to the colours on the input and output jacks. | NOTE | To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV. This system supports Digital sampling frequencies of 32 kHz or higher from external digital components. This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported. ........................................................................................................ ............................................................................................ | 20 English Connections Connecting to a Network Router You can connect your product to your network router using one of the methods illustrated below. Wired Network iPod LAN IMPEDANCE : 3 SPEAKERS OUT OPTICAL VIDEO OUT AUX IN DIGITAL AUDIO IN HDMI OUT 1 HDMI IN 2 FM ANT Broadband service Broadband service Broadband modem (with integrated router) Broadband modem Router Or | NOTE | Internet access to Samsung’s Software Update server may not be allowed, depending on the router you use or your ISP’s policy. For more information, contact your ISP (Internet Service Provider). DSL users, please use a router to make a network connection. To use the AllShare Play function, you must connect your PC to your network as shown in the illustrations on the left. The connection can be wired or wireless. Wireless Network 5V 500mA Broadband service Wireless IP sharer | NOTE | If your wireless IP router supports DHCP, this product can use a DHCP or static IP address to connect to the wireless network. Set your wireless IP router to Infrastructure mode. Ad-hoc mode is not supported. The product supports only the following wireless security key protocols: - WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES) Select a channel on the wireless IP router that is not currently being used. If the channel set for the wireless IP router is currently being used by another device nearby, it will result in interference and communication failure. If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your router or AP to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will not support a connection in compliance with new Wi- Fi certification specifications. Wireless LAN, by its nature, may cause interference, depending on the operating conditions (AP performance, distance, obstacles, interference by other radio devices, etc). ........................................................................................................ ............................................................................................ English 21 | 04 Settings The Initial Settings Procedure • The Home menu will not appear if you do not configure the initial settings. • The OSD (On Screen Display) may change in this product after you upgrade the software version. • The access steps may differ depending on the menu you selected. 1 . Turn on your TV after connecting the product, and then turn on the product. When you turn on the product for the first time, the product automatically displays the Initial Settings Language screen. Initial Settings > On-Screen Language Select a language for the on-screen displays. Next ^ Ў Dansk Nederlands English Eesti keel Suomi Francais Deutsch ........ Hausa Magyar Asusu Igbo Italiano Select English as the on-screen menu language. 2 . Use the ^Ў<> buttons on the remote to select the desired language, and then press the E button twice. The Start screen appears. 3 . Press the E button to start setup. The Network Settings screen appears. The next step is to set up a wireless network using an internal LAN Adapter. If you want to connect to your wired network, plug in a network cable. Previous Skip Next Initial Settings > Network Settings (1/5) 4 . Press the E button to set up the product’s wireless network connection or select Skip, and then press the E button to skip network setup. If you selected Skip, go to Step 12. | NOTE | The product starts the wireless network connection procedure by default. If you want to set up a wired connection, select Skip, and then go to "Configuring Your Network Connection" on page 29 after you have completed the Initial Settings Procedure. If you skip wireless network setup here, go to "Wireless Network" on page 30 to set up the product's wireless network connection later. 5 . The product searches for and then displays all available wireless router network connections. Initial Settings > Network Settings (2/5) Refresh WPS(PBC) Previous Next Skip Select your wireless router from the list. 1 / 4 KIMING_VTOWER TIAS si-ap Add Network surlwang5 6 . Use the ^Ў buttons to select a router, and ...