Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
NOTE Certain HDMI output resolutions may not work, depending on your TV. If an HDMI cable is connected or removed during playback of a CD-DA, MP3 or JPEG fi le, the product will stop playing. After making the video connection, set the Video input source on your TV to match the corresponding Video output (HDMI) on your product. See your TV owner's manual for more information on how to select the TV's Video Input source. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select HDMI as the external source of the TV. You must have an HDMI connection to enjoy videos with 3D technology. A long HDMI cable may cause a screen noise. If this is the case, set Deep Color to Off in the menu. . . . . . . . DVD or Blu-ray Player SAT (Satellite/Set top box) HDMI OUT HDMI IN HDMI IN Loop the HDMI cable once and attach the ferrite core(Large) as shown. Connections HDMI IN : Connecting to an External Component with an HDMI Cable 1. Connect an HDMI cable (not supplied) from the HDMI IN1 or HDMI IN2 jack on the back of the product to the HDMI OUT jack on your digital devices. 2. Press the FUNCTION button to select HDMI1 or HDMI2 input. The mode switches as follows : BD/DVD D. IN AUX HDMI1 HDMI2 TUNER HDMI Auto Detection Function For possible HDMI resolutions, see page 38. • This function is not available if the HDMI cable does not support CEC. • HDMI connection description -HDMI outputs only a pure digital signal to the TV. -If your TV does not support HDCP, random noise appears on the screen. • What is the HDCP? HDCP (High-band width Digital Content Protection) is a system for protecting BD/DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made. ! CAUTION . The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the product. 30 English English 31 02 Connections Connecting Audio from External Components OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital component. Press the FUNCTION button to select D.IN input. The mode switches as follows : BD/DVD D. IN AUX HDMI1 HDMI2 TUNER NOTE To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV. This system supports Digital sampling frequencies of 32 kHz of higher from external digital components. This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported. AUX : Connecting an External Analogue Component Analogue signal components such as a VCR. Connect AUX IN (Audio) on the product to the Audio Out of the external analogue component. Be sure to match connector colours. Press the FUNCTION button to select AUX input. The mode switches as follows : BD/DVD D. IN AUX HDMI1 HDMI2 TUNER NOTE You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product. 1. 2. • . . . . 1. • 2. • . . Optical Cable (not supplied) Audio Cable (not supplied) If the external analogue component has only one Audio Out, connect either left or right. Set-Top Box VCR Red White OPTICAL AUX 32 English Connections Connecting to the Network This product supports network based services (see pages 60~65), BD-LIVE and software upgrade under the network connection. It is recommended to use an AP (Access Point) or IP router. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance. Cable Network Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the product to the LAN terminal of your modem. Set the network options. (See page 45) NOTE Internet access to Samsung’s software update server may not be allowed, depending on the router you use or the ISP’s policy. For more information, contact your ISP (Internet Service Provider). For DSL users, please use a router to make a network connection. For the AllShare function, a PC must be connected in the network as shown in the fi gure. 1. 2. . . . . Router Broadband modem Broadband service Or Broadband modem (with integrated router) Broadband service Networking with PC for AllShare function (See pages 64~65) English 33 02 Connections Connecting the FM Antenna Connect the FM antenna supplied to the FM ANT Jack. Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid surface. NOTE This product does not receive AM broadcasts. 1. 2. . . FM Antenna (supplied) Attaching the Toroidal Ferrite Core to the Speaker Cable Open the bigger one of two toroidal ferrite cores by pulling the lock lever. Arra...