Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
, Press M to zoom in. Network connection The player cannot connect to the network. , Check the network connection (page 14) and the network settings (page 26). The message “A new software version has been found on the network. Perform update under "Network Update."” appears on the screen when turning the player on. , See “Network Update” (page 21) to update the player to a newer software version. BRAVIA Sync (“Control for HDMI”) The “Control for HDMI” function does not work (BRAVIA Sync). , Check that “Control for HDMI” is set to “On” (page 25). , If you change the HDMI connection, turn the player off and on again. , If power failure occurs, set “Control for HDMI” to “Off,” then set “Control for HDMI” to “On” (page 25). , Check the following and refer to the instruction manual supplied with the component. – the connected component is compatible with the “Control for HDMI” function. – the connected component’s setting for the “Control for HDMI” function is correct. , When you connect the player to a TV through an AV amplifier (receiver), – if the AV amplifier (receiver) is not compatible with the “Control for HDMI” function, you may be unable to control the TV from the player. – if you change the HDMI connection, disconnect and reconnect the AC power cord, or a power failure occurs, try the following: 1Switch the input selector of the AV amplifier (receiver) so that the picture from the player appears on the TV screen. 2Set “Control for HDMI” to “Off,” then set “Control for HDMI” to “On” (page 25). Refer to the instruction manual supplied with the AV amplifier (receiver). Additional Information ,continued Others Others , Press OPTIONS, and select “Play from beginning.” Playback does not start from the resume point where you last stopped playing. , The resume point may be cleared from memory depending on the disc when – you open the disc tray. – you disconnect the USB device. – you play other content. – you turn off the player. The disc tray does not open and “LOCKED” or “TLK ON” appears on the front panel display. , When “LOCKED” appears, the player is locked. To cancel the Child Lock, hold down N on the player until “UNLOCK” appears on the front panel display (page 8). , When “TLK ON” appears, contact your Sony dealer or local authorized Sony service facility. The disc tray does not open and you cannot remove the disc even after you press Z. , Try the following: 1Turn the player off, and disconnect the AC power cord. 2Reconnect the AC power cord while pressing down Z on the player. 3Keep pressing down Z on the player until the tray opens. 4Remove the disc. 5When “WAIT” appears on the front panel display, hold down [/1 on the player for more than 10 seconds until the player turns on again. “Exxxxx” or “FAN ERR” appears on the front panel display. , When “Exxxxx” appears, contact your nearest Sony dealer or local authorized Sony service facility and give the error code. , When “FAN ERR” appears, try the following: 1Check that the ventilation holes on the rear of the player are not blocked. 2Place the player in a location with adequate ventilation to prevent heat build-up in the player. The player does not respond to any button. , Moisture has condensed inside the player (page 4). , Hold down [/1 on the player for more than 10 seconds until the indicators on the front panel display turn off. If the player still does not respond to any button, disconnect then reconnect the AC power cord. Specifications Specifications Laser: Semiconductor laser Inputs and outputs (Jack name: Jack type/Output level/Load impedance) LINE OUT R-AUDIO-L: Phono jack/2 Vrms/10 kilohms DIGITAL OUT (OPTICAL): Optical output jack/–18 dBm (wave length 660 nm) DIGITAL OUT (COAXIAL): Phono jack/0.5 Vp-p/75 ohms HDMI OUT: HDMI 19-pin standard connector COMPONENT VIDEO OUT (Y, PB, PR): Phono jack/Y: 1.0 Vp-p/ PB, PR: 0.7 Vp-p/75 ohms LINE OUT VIDEO: Phono jack/1.0 Vp-p/75 ohms LAN (100): 100BASE-TX Terminal USB: USB jack Type A (For connecting a USB memory, memory card reader, digital still camera, and digital video camera) General Power requirements: U.S. and Canada models: 120 V AC, 60 Hz Models for other areas: 110-240 V AC, 50/60 Hz See page 4 for further information. Power consumption: 22 W Dimensions (approx.): 430 mm . 219 mm . 36 mm (17 in. . 8 5/8in. . 1 7/16 in.) (width/depth/height) incl. projecting parts Mass (approx.): 2.0kg (4 lb6 1/2 oz) Operating temperature: 5.C to 35 .C (41°F to 95 °F) Operating humidity: 25 % to 80 % Supplied accessories See page 11. Specifications and design are subject to change without notice. Playable discs Blu-ray Disc*1 BD-ROM BD-R*2/BD-RE*2 DVD*3 DVD-ROM DVD-R/DVD-RW DVD+R/DVD+RW CD*3 CD-DA (Music CD) CD-ROM CD-R/CD-RW Super Audio CD *1 Since the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and the version. The audio output differs depending on the source, connected output jack, and selected audio settings. *2 BD-RE: Ver.2.1 BD-R: Ver.1.1,...
Este manual também é adequado para os modelos :Blu-Ray - BDP-S370 (2.77 mb)