Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
RQCA1922~Body3_eng.fm 5 ページ ２００９年４月２日 木曜日 午後４時４４分
3 Close the safety belt buckle and fasten the unit to the
ENGLISH
bracket.
≥Adjust the length of the safety belt so that there is no
Enjoying video in the back seat with
slack.
the Headrest mounting bracket
4 Turn the screen outwards and close.
You can enjoy video in the back seat attaching the unit to the
≥ The angle of the LCD may shift while driving due to vibration, etc.
back of the front seat.
Depending on the type of headrest, you may not be able to
≥ Do not attach or detach the unit or the bracket while
attach the bracket. In the event of an accident etc., the unit
the car is moving.
could become loose and cause injury.
≥ Do not attach the unit in the following locations:
Detach the unit from the bracket.
– anywhere other than the back of the front seat
≥ Remove the safety belt from the unit and the bracket.
– where it can be viewed or operated by the driver
≥ Rotate the screen and then close it with the screen
– where it interferes with the driver’s operation of the vehicle
turned inwards.
– where it interferes with the operation of an airbag
1 Press the release buttons (left and right) in towards the
≥ Ensure that the bracket belt is securely fastened and
center of the bracket.
check the lock on the unit. Refer to installation
2 While holding the unit with both hands, lift it up about 4 to 5
instructions.
mm and pull forward to remove it.
In the event of an accident, sudden acceleration or
≥ Do not press the release buttons any time other than
braking, the unit could become loose and cause injury or
when detaching the unit from the bracket.
property damage.
≥ Only use the Panasonic bracket supplied to attach the
unit to the car seat.
≥ Using this unit safely in a car.
Connecting the included Car DC
In the event of an accident, there is a slight possibility that
Adaptor
the unit could become detached from the Headrest Mounting
Bracket. Therefore, use the safety belt (included) together
≥ Refer to the illustration on page 4 as well.
with the Headrest Mounting Bracket to secure the unit.
Before connection, consult your car owner’s manual or your
≥ Refer to the illustration on page 2 and 3 as well.
dealer.
≥ Connect to the cigarette lighter socket of a vehicle that has a
Attach the Headrest mounting bracket to
12 V battery. It is not compatible with a vehicle that has a
the front seat.
24 V battery.
≥ Adjust the headrest so there is an open space of about
≥ This is a special negative grounded Car DC Adaptor. Using
3 cm. If this space is larger than 3 cm, the unit could
this Car DC Adaptor with a plus grounded car can cause
become loose and cause injury in the event of an
malfunction and lead to fire.
accident etc.
1 Connect the car DC adaptor to the unit.
≥ Attach the bracket to the seat so that the label side of the
2 Connect the car DC adaptor to the
bracket can be seen from the rear of the seat.
1 Close the bracket belt buckle.
cigarette lighter socket.
≥ Leave the belt somewhat loose.
≥ Place the unit on a stable surface.
2 Pass the safety belt (included) through the space between
Replacing the fuse
the front seat and the bracket.
≥ Adjust the length of the bracket belt and tighten so that
Replace only with the specified 125 V/250 V, 3.0 A fuse.
there is no slack.
Use of any other type can cause fire.
1 Open the socket.
Attach the unit to the bracket.
2 Replace the fuse.
≥ To avoid damaging the screen, attach the unit to the
3 Close the socket.
bracket with the screen turned inwards and closed.
Cautions
К
1 While holding the unit with both hands, push it in so that
Ы
the protruding marks (
≥ To avoid draining your car battery
A) on the bracket fit into the slots on
– Disconnect the Car DC Adaptor from the cigarette lighter
ЯЗ
the rear of the unit.
Й
after use. The Car DC Adaptor continues to consume
2 Press the unit down about 4 to 5 mm.
К
И
some power even if it is not being used, and if a battery
С
≥ Please check the fol owing points before use.
С
pack is attached to this unit, it will start recharging which
– The bracket is securely fastened to the unit.
РУ
uses more power.
– The unit is not loose and cannot be lifted upwards.
– Do not use the Car DC Adaptor for long periods when the
≥ When correctly attached, you will hear a locking sound.
engine is not running.
Fasten the unit to the bracket with the
≥ Turn the unit off before stopping the engine while using Car
А
К
safety belt.
DC Adaptor, otherwise resume play may not work.
Ь
С
≥ Leave some slack in the cord.
≥ Put the disc into the unit before attaching the safety belt.
Ї
Н
≥ No responsibility wil be taken for damage that occurs due to
А
≥ Unfasten the safety belt buckle before exchanging
Р
faulty installation.
discs. Close the safety belt buckle again after
УК
exchanging discs.
1 Open the screen and rotate it.
You can enjoy audio through your car audio system by
2 Pass the safety belt through the gap between the screen
connecting a car stereo cassette adaptor (not included) to
and the unit body from the left and right of the unit.
the headphone jack on the left side of this unit.
≥ To avoid damaging the unit, attach the belt so that the
5
fabric part (B) covers the top of the unit.
RQCA1922
...