Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
Consult the dealer or an experienced radio/TV technician for help. Contents Safety Precautions 3 Your COMBO Drive 4 Upgrading the Firmware Flash 5 System Requirements 5 Installing the COMBO Drive 6 Connecting the Cables 6 Installing the CD Record Utility 9 Installing the Device Driver 9 Setting Up the Device Driver 10 Recommended Disc Types 10 Using the COMBO Drive 11 Storing and Cleaning Your Discs 11 Solving Recording Problems 12 Caution with errors 14 Term Description 15 Recommended Disc Type 15 General DMA Installation Guide 15 Solving Technical Problems 16 Technical Specifications 18 * All product names mentioned in this document are trademarks or registered trademarks of their respective owners. 2 Safety Precautions The following diagrams illustrate your COMBO drive. . Changes or modifications not expressly approved by the party responsible compliance could void the user’s authority to operate the equipment. You must not use the drive in any manner other than that specified in this guide. CAUTION Do not attempt to repair the COMBO drive yourself. Contact your dealer or local SAMSUNG representative for all repairs. If you make any adjustments or perform any operations other than those specified in this guide, you run the risk of exposure to hazardous radiation. Avoid exposing your eyes or skin to direct or scattered radiation. WARRANTY Please refer to the Samsung limited warranty statements. PRECAUTIONS 1. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. 2. Always check each disc for cracks before using it. If there are cracks on the surfaces, especially around the border of the center hole, we recommend that you make a copy of the disc immediately and then stop using it. If you continue using the disc, it will probably develop more cracks and eventually cause irreparable damage. 3. Do not use poor quality discs: From unknown sources Without any copyright Scratched or damaged in any way 3 ENGLISH Your COMBO Drive Upgrading the ENGLISH 12 3456 The product firmware can be upgraded following Web site: System Requirements 1. Connector for stereo headphones with a 3.6 mm stereo mini-jack 2. Headphone volume control 3. Disc compartment (the compartment opens and closes automatically when you press the Eject button) 4. Emergency eject hole (if the compartment does not open when you press the Eject button, power off the computer, insert a pin or unfolded paper clip in the hole and push firmly) 5. Indicator light 6. Eject button 1234 5 1. Two-pin digital audio output terminal for use with a sound or MPEG card supporting digital audio features 2. Four-pin sound output terminal for use with a sound card (refer to the sound card documentation for further details) 3. Master/slave select terminal 4. 40pin host E-IDE interface connector 5. 4pin power terminal 4 Before you install the COMBO drive, we strongly recommend your setup meets the system requirements listed below. Item Description Computer Intel Pentium II 300MHz/Celeron 333A(or higher), 32 MB of RAM (or higher) with an IDE interface Free expansion unit 5.25 inch Disk space 700 MB minimum Windows version Windows 95/98/2000/ME/XP/NT4.0 OSR2 (or higher) (For Windows NT, we recommend Service Pack2, and Version is over 4.00.1381) MS-DOS 5.0 or higher (For MS-DOS, The CD-R/CD-RW driver can only read a disc without premaster Software.) DVD Video playback PC with Windows 95/98/2000/ME/XP/NT4.0 OSR2 DVD-Video playback software and appropriate hardware (the Power DVD MPEG software is included in the COMBO drive package) DVD Region Protection Coding (RPC): The RPC feature is supported on DVD players and is used with DVD-video discs (such as movies). Currently, the motion picture industry has divided the world into different regions or zones that correspond to the regional markets into which the motion picture industry releases movies. Simply put, RPC codes are placed on movies marketed throughout the world, based on the region of the world in which they are being sold. These RPC codes help control and prevent pirating of new movies into other motion picture regions prior to their true release dates within those markets. The SM-316 COMBO drive supports RPC phase II. In the RPC-2 mode, the local code can be changed by users. RPC-2 is selected by default for the SM-316 COMBO drive. You can change the region code up to five times via an MPEG application. Please contact your dealer or local SAMSUNG representative if you wish to change the local code more than five times. 5 ENGLISH 6 7 Installing the COMBO Drive Connecting the Cables To install your COMBO drive in the PC, proceed as follows. 1 Make sure that the PC is powered off and disconnected from any power source. 1 Connecting the power cable The 4-pin power cable from the internal power unit of your computer must be connected to the power terminal on the rear of the COMBO drive. Note:An improperly connected power cable ...