Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
To rewrite at a high speed, use the disc which High Speed is printed on. HS-RW : supporting 4X, 10X General-RW : supporting 2X, 4X Caution with errors Every CD-R or CD-RW drive records data by applying recording laser onto a CD. If the CD is damaged or recording data is not possible, you need to remove the following causes of the error before using the CD. • It is recommended to set a CD-R or CD-RW drive as follows. 1 Do not work on a multi-tasking environment and remove screen savers. • If you work on a multi-tasking environment while the CD-RW drive is recording/deleting data, Buffer Under-Run may occur. 2 Do not allow any external access to the Host PC while recording data. • If another user accesses your printer through a network while you are recording data, errors may occur. 3 Remove the Auto-Run function of the CD. • If you insert a CD that has the Auto-Run function to a drive connected to a PC while recording/deleting data, this may cause errors. How to cancel (select) the Auto-Run function Cancel (Select) the Auto-Run function in [Start > Setting > Control Panel > System > Device Manager > CD-ROM Setting] 4 Use image files when you record many small files. • If you use a lot of small size files for recording, this may reduce the transaction rate of the PC. Although Justlink function is often run, the recording quality may become low. • If you copy a CD from another, you do not require making available space in the hard disk. However, when you use image files, you need to copy them on the hard disk first and then copy to a CD. In this case, you need to ensure maximum 700MB of available space in the hard disk for reliable recording process. 5 Use an E-IDE cable, which has the specified length (46cm). • Using E-IDE cables longer than 46cm may cause errors during data transaction. 6 Use only one recording software program. • To install a software program for recording, uninstall any other types or versions of recording software programs first and then reboot the computer. Make sure you use the recording software CD (Nero Burning Rom / Roxio Easy CD Creator) provided by us. Using our software program with others may cause errors in recording. • Not compatible with Windows 95 in case of Roxio Software. 14 Term Description What is Buffer Under-Run? Every CD-R or CD-RW drive records the data that the Host PC wants to record until the data flow ends. However, if the buffer becomes empty temporarily, this may cause errors in recording data. What is Auto-Run? If inserting a CD into a drive, the operating system executes the Autorun.inf file of the CD automatically. What is Justlink? This function is to check the buffer to see if there are data while recording. If the buffer is empty, it waits at the address and then restarts recording after the buffer is full. You can avoid Buffer Under-Run problems by applying the above-mentioned principle. Recommended Disc Types CD-R Ricoh, ACER, CMC, MITSUI, BEALL, SKC, DAIYO-YUDEN, VERBATIM, MAXELL CD-RW Ricoh, Samsung, CMC, Ritek, SKC A General DMA Installation Guide (Windows 95/98/Me) Important! Please read the entire DMA installation guide before installing your COMBO drive. About DMA Installation For stable writing performance at high speeds, Installation of DMA transfer mode for E-IDE interface is strongly recommended. We recommend DMA mode for fast writing. DMA Setting Before you install your COMBO drive, we recommend to set DMA to enabled on your PC system. See the following procedure to set DMA transfer mode in windows oprerating system. (Windows 95 OSR2/98/ME) • Click on START • Select your CD-R/RWdrive • Click on Settings • Click on the Properties button • Select Control Panel • Click on the Settings tab • Select the System Icon • Check the DMA checkbox to enables DMA. • Select the Device Manager panel • Click OK in System Properties • Restart your PC • Expand the CD-ROM icon Windows 2000/XP Select the DMA mode by selecting [Start > Setting > Control Panel > System > Device Manager > IDEATA/ATAPI Controller > Default/Assistant IDE Channel Advanced Information] 15 ENGLISH Solving Technical Problems Problem Meaning / Solution The COMBO drive is not detected by the computer. Check that the power, audio and IDE cables are correctly connected to the computer. After installing the COMBO drive, the PC gets slower. Change the IDE cable and reconnect it to the computer. Preferably, connect a second IDE cable to the COMBO drive in master mode. Check the position of the jumper in the master/slave select terminal. The COMBO drive is not recognized by MS-DOS. Reinstall the device driver or update it with the latest version by downloading it from the Samsung Web site. - - The COMBO drive is not detected by Windows. This case may occur when there is a Windows installation problem; reinstall Windows. No sound is heard from an audio CD. Check whether the audio cable is...