Assessments - 2, GPA: 3
(
)
)
|
Facilidade de uso
Do not use it in tilted position. • Don’t move the drive suddenly from a cold place to a warm one or raise the room temperature suddenly. Condensation may occur, causing abnormal operation. • Make sure to remove the disc before moving the drive. The disc may become damaged, causing data loss. • Be careful to prevent foreign objects, such as liquids or metal, from entering the drive. • Don’t interrupt the electric power while the drive is operating. • Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. 2 System Environment Operating Environment This unit can be operated in the system environment explained here. System requirements • CPU : Pentium D 3.2 GHz or higher (Motherboard that supports SATA.) (Recommended Core 2 Duo E6300 or higher.) • O/S : Windows 7 / Windows XP (Home / Professional / Media Center Edition) with SP2 or higher / Windows Vista (X86, X64) SP1 or higher • RAM : 1GB or more • HDD : 30GB or more of available space Interface Serial ATA Drive bay 5.25-inch half-height bay required Power +5V/+12V power socket required Recommended media manufacturer DVD-R : Mitsubishi Kagaku Media, Taiyo Yuden. DVD-RW : JVC, Mitsubishi Kagaku Media. DVD+R : Mitsubishi Kagaku Media, Verbatim. DVD+RW : Mitsubishi Kagaku Media, Verbatim. DVD±R DL : Mitsubishi Kagaku Media, Verbatim. DVD-RAM : Maxell. CD-R : Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden or TDK. CD-RW : LG, Mitsubishi Kagaku Media, Verbatim. * Compatibility problem in write/read function may occur with media depending on the media manufacturing quality. * There may be some cases when motion picture playback is not smooth depending on bit rate. * When using LightScribe function on Windows Vista, higher Vista Service Pack 1 must be installed. • Playing Blu-ray Disc Movies *NOTICE* Graphic Card Monitor Driver Interface HDCP *2 Interface HDCP Resolution Analog AACS *1 VGA (D-SUB) Not required VGA (D-SUB) Not required 1024x768 or more (Recommended : 1920x1080)Digital Compliant DVI or HDMI Compliant DVI or HDMI Compliant Due to copyright protection features, certain requirements must be met in order to playback BD movies on a computer. When using digital video connections, the monitor and graphics card must support High-bandwidth Digital Content Protection (HDCP). Note that most monitors and graphics cards currently don’t support HDCP. But, most High Definition TVs and multimedia monitors do support HDCP. Refer to the PC or graphic card maker’s web site to see if your card supports HDCP. Some video cards that currently support HDCP: -nVIDIA: GeForce 7800 GTX 512 / 7900 GT / 7900 GX2 / 7900 GTX / 7950 GX2 / 8600 GS / 8600 GT / 8600 GTS / 8800 GTX or higher with 256MB min memory. - ATI: Radeon® HD2300/ HD2400/ HD2600 series or higher with 256MB min memory. *1 Graphic card driver shall meet AACS compliance criteria. Please consult your graphics card vendor for proper driver solution. *2 HDCP (High Bandwidth Digital Content Protection): Required to view pre-recoded Blu-ray Disc which are copy protected. 3 . Occasionally CD-R and CD-RW discs written by a CD-R/RW drive cannot be read by other CD drives. These unreadable discs may need to be read using the CD-R/RW drive they were created with. . Please note: Certain software (i.e. particularly those including Video playback) may require a considerably increased specification PC to give acceptable results. While this BD-ROM/DVD Rewriter can read DVD-video or BD-MV(BD-ROM) discs, decoding them to display on your pc’s monitor requires separate MPEG, H.264 or VC-1 decoding that is done by separate hardware (either an MPEG, H.264 or VC-1 decoder card or MPEG, H.264 or VC-1 decoding done by your video card), or separate software that you install to do MPEG, H.264 or VC-1 decoding. For further details, refer to the documentation that comes with MPEG, H.264 or VC-1 software. Location and Function of Controls Front Panel Rear Panel 1 21 2 43 1. Disc Tray 1. SATA Power Connector (15 pin) 2. Drive activity indicators 2. SATA Data Connector (7 pin) The LED is used to indicate the operation of BD-ROM/DVD Rewriter. 3. Emergency Eject Hole 4. Eject Button 4 Installing the Drive Before installing the drive, please note the following points. ¦ You will need the following: • A screw driver of a suitable size to fit the securing screws for the drive unit. • The manual for the computer, so you can find the mounting positions for the SATA cable. ¦ Turn off all peripheral appliances of the computer and the computer itself, and disconnect their power cords from the wall sockets. ¦ Discharge any static electricity on your person by touching the computer covers, etc. Removing the Computer Cover Make sure all peripheral devices of the computer and the computer itself are turned off, and then remove the cover. Refer to the manual for the computer for details about removing the cover. NOTE : There may be sharp e...