|
Facilidade de uso
• When connecting two IDE devices to the Primary or Secondary connectors, make sure that the two devices are not configured as both Master, or both Slave. If they are both set the same, Windows may fail to run or recognize the drives. • The total length of the IDE cable should be no more than 18 inches (about 45 cm). • Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. 1 Features • Enhanced-IDE (ATAPI) interface. • Power tray loading and ejection of disc. (The disc can also be ejected manually.) • Combination CD-R/RW, DVD-R/RW, DVD-R DL, DVD+R/RW, DVD+R DL, DVD-RAM Drive functions into one drive. • Supports Region playback control Phase II. • Automatic buffer underrun error prevention technology. • Supports LightScribe Direct Label Printing Technology - *Optional. * You can use a variety of Drive GH22LP20 GH22NP20 LightScribe * Supported Not Supported System Environment Computer This unit can be operated in the system environment explained here. System requirements CPU: Pentium III 1.0GHz (Recommended system requirements for optimal performance, CPU: Pentium IV 2.4GHz or faster, Memory: 512MB or greater). VGA Card Memory 128MB or greater. Hard disk 20GB or more free space. (The free space needed for writing depends on the quantity of data.) Interface Enhanced-IDE interface (as Primary Slave, Secondary Master or Slave) Drive bay 5.25-inch half-height bay required Power +5V/+12V power socket required Software Required OS Windows 2000 Professional/XP(Home Edition/ Professional)/Vista, Direct X 9.0 or Higher is required CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD±R DL, DVD-RAM media CD-R : LG, Mitsubishi Kagaku Media, Verbatim, That’s, Ritek or HP discs are recommended. CD-RW : LG, Mitsubishi Kagaku Media, Verbatim are recommended. DVD-R : Mitsubishi Kagaku Media, Maxell, That’s are recommended. DVD-RW : Victor. JVC, Mitsubishi Kagaku Media, TDK are recommended. DVD+R : Mitsubishi Kagaku Media, That’s, Maxell are recommended. DVD+RW : TDK, Mitsubishi Kagaku Media, Ricoh are recommended. DVD±R DL : Mitsubishi Kagaku Media, Verbatim are recommended. DVD-RAM : Maxell, Mitsubishi Kagaku Media are recommended. * Compatibility problem in write/read function may occur with media depending on the media manufacturing quality. * For DVD±R 22x support media: Mitsubishi Kagaku Media, That’s are recommended. * For DVD+R DL 16x support media: Ritek is recommended. * For Optimal writing, 80 pin E-IDE cable and Pentium IV 2.4GHz or faster are recommended. * Upon the media condition or some of user’s environment the maximum speed sometimes could not be guaranteed. 2 . Occasionally CD-R and CD-RW discs written by a CD-R/RW drive cannot be read by other CD drives*. These unreadable discs may need to be read using the CD-R/RW drive they were created with * The disc written using the CD-R/RW drive might not be readable by CD-ROMs other than ...
Este manual também é adequado para os modelos :unidades de CD / DVD - 370898 (324.95 kb)
unidades de CD / DVD - GH22LP20 (324.95 kb)
unidades de CD / DVD - GH22LP20BlackBulk (324.95 kb)
unidades de CD / DVD - GH22LP20BlackRetail (324.95 kb)