Assessments - 2, GPA: 3.5 ( )

Fabricante : LG Arquivo Tamanho: 193.26 kb Arquivo Nome : Língua de Ensino:

• Don’t interrupt the electric power while the drive is operating. • Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. 1 Features • Serial ATA interface. • Power tray loading and ejection of disc. (The disc can also be ejected manually.) • Combination CD-R/RW, DVD-R/RW, DVD-R DL, DVD+R/RW, DVD+R DL, DVD-RAM Drive functions into one drive. • Supports Region playback control Phase II. • Automatic buffer underrun error prevention technology. • Supports LightScribe Direct Label Printing Technology - *Optional. * You can use a variety of Drive GH24LS50 GH24NS50 LightScribe Supported Not Supported System Environment Computer This unit can be operated in the system environment explained here. System requirements CPU: Motherboard that supports Serial ATA. (Recommended Pentium IV 3.2GHz or higher.) RAM:512MB or higher. VGA Card Memory 128MB or greater. Hard disk 20GB or more free space. (The free space needed for writing depends on the quantity of data.) Interface Serial ATA Drive bay 5.25-inch half-height bay required Power +5V/+12V power socket required Software Required OS Windows 7/Windows Vista(X86, X64)/Windows XP[Home Edition/ Professional/ Media Center Edition] with SP2, Direct X 9.0 or Higher is required CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD±R DL discs CD-R : LG, Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden or TDK discs are recommended. CD-RW : LG, Ricoh, Mitsubishi Kagaku Media, Verbatim discs are recommended. DVD-R : Mitsubishi Kagaku Media, Taiyo Yuden are recommended. DVD-RW : Mitsubishi Kagaku Media, Verbatim are recommended. DVD+R : Mitsubishi Kagaku Media, Verbatim are recommended. DVD+RW : Mitsubishi Kagaku Media, Verbatim are recommended. DVD-RAM : Maxell, Panasonic are recommended. DVD+R DL : Mitsubishi Kagaku Media, Verbatim, Ritek are recommended. DVD-R DL : Mitsubishi Kagaku Media, Verbatim are recommended. * Compatibility problem in write/read function may occur with media depending on the media manufacturing quality. * For DVD±R 20x, 22x, 24x support media: Mitsubishi Kagaku Media. * For DVD+R DL 12X support media: Ritek 16x (MID Code: Ritek S06076(4ch)) * For DVD-R DL 12X support media: Mitsubishi Kagaku Media. (MID Code: MKM04RD30) * Upon the media condition or some of user’s environment the maximum speed sometimes could not be guaranteed. 2 . Occasionally CD-R and CD-RW discs written by a CD-R/RW drive cannot be read by other CD drives*. These unreadable discs may need to be read using the CD-R/RW drive they were created with * The disc written using the CD-R/RW drive might not be readable by CD-ROMs other than Multi-read compatible (UDF compatible) CD-ROMs Multiread compatible (UDF compatible) CD-ROMs are: 1. CD-ROMs that can read low reflectance. 2. CD-ROMs that support Packet Write. . Please note: Certain software (i.e. particularly those including Video playback) may require a considerably increased specification PC to give acceptable results. While this Super Multi DVD Rewriter can read DVD-video discs, decoding them to display on your pc’s monitor requires separate MPEG decoding that is done by separate hardware (either an MPEG decoder card or MPEG decoding done by your video card), or separate software that you install to do MPEG decoding. For further details, refer to the documentation that comes with MPEG software. Location and Function of Controls Front Panel Rear Panel 4 12 3 1 2 1. Disc Tray 1. SATA Power Connector (15 pin) 2. Emergency Eject Hole 2. SATA Data Connector (7 pin) 3. Stop/Eject Button 4. Drive activity indicator 3 Installing the Drive Before installing the drive, please note the following points. ¦ You will need the following: • A screw driver of a suitable size to fit the securing screws for the drive unit. • The manual for the computer, so you can find the mounting positions for the SATA cable. ¦ Turn off all peripheral appliances of the computer and the computer itself, and disconnect their power cords from the wall sockets. ¦ Discharge any static electricity on your person by touching the computer covers, etc. Removing the Computer Cover Make sure all peripheral devices of the computer and the computer itself are turned off, and then remove the cover. Refer to the manual for the computer for details about removing the cover. NOTE : There may be sharp edges inside the computer so take care to avoid injury. Mounting the Drive 1. Remove the 51/4. drive bay panel from the computer. Refer to the manual for the computer for details. 2. Insert the drive unit into the bay. Do not apply excessive pressure to the cables inside the computer. 3. Secure the drive with the screws. If there is not enough space behind the drive, connect the SATA and other cables before securing the drive. NOTE : This is a general installation guide. If your PC hardware appears different, please consult your hardware manual for installing periphe...

Baixe o seu

Para fazer o download, introduza 2 dígitos :